[MinnowBoard] GPIO on Windows OS

Mon May 18 08:15:27 UTC 2015

There are Windows guys in here, and at least I am interested in using the
gpios with windows, but I am not at that stage yet.
I would appreciate if u guys keep the mailing list/ me updated on how to
use the gpios

Cheers

---------------------------------------------------

Arne Gollin

Cognitive Neuroscience & CITEC

Bielefeld University

Universitätsstrasse 25  (W3-246)
33615 Bielefeld

phone:     +49-521-106  5703
fax:              +49-521-106  5701
arne.gollin at uni-bielefeld.de
www.uni-bielefeld.de/biologie/cns

Am 18.05.2015 4:38 vorm. schrieb <
elinux-minnowboard-request at lists.elinux.org>:

Send elinux-MinnowBoard mailing list submissions to
        elinux-minnowboard at lists.elinux.org

To subscribe or unsubscribe via the World Wide Web, visit
        http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
or, via email, send a message with subject or body 'help' to
        elinux-minnowboard-request at lists.elinux.org

You can reach the person managing the list at
        elinux-minnowboard-owner at lists.elinux.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of elinux-MinnowBoard digest..."

Today's Topics:

   1. Re: GPIO on Windows OS (Wei, David)
   2. Re: Info Windows (Wei, David)
   3. Re: Silverjaw working? (Wei, David)

---------- Weitergeleitete Nachricht ----------
From: "Wei, David" <david.wei at intel.com>
To: MinnowBoard Development and Community Discussion <
elinux-minnowboard at lists.elinux.org>
Cc: "Rouzanov, Ivan" <ivan.rouzanov at intel.com>
Date: Mon, 18 May 2015 01:59:07 +0000
Subject: Re: [MinnowBoard] GPIO on Windows OS

Hi,

Just a kind reminder that there may be no Windows guys in this mail group.

Thanks,

David | SSG BIOS

*From:* elinux-MinnowBoard [mailto:
elinux-minnowboard-bounces at lists.elinux.org] *On Behalf Of *Leigh Gawne
*Sent:* Wednesday, May 13, 2015 6:46 PM
*To:* elinux-minnowboard at lists.elinux.org
*Subject:* [MinnowBoard] GPIO on Windows OS

Hello everyone,

Just digging into how best to make us of the GPIOs under Windows.

My understanding is that for the upcoming Windows 10 IoT supported on the
Minnowboard MAX, there is native support in the OS through the namespace
“Windows.Devices.Gpio”:

https://ms-iot.github.io/content/win10/samples/PinMappingsMBM.htm

>From what I can see there is no such existing support in Windows 8.1, and I
will have to do a little driver development built on top of the Intel
embedded drivers (https://embedded.communities.intel.com/thread/7669). Not
an issue, but if there is anything out there that exists which means I
don’t have to reinvent the wheel at this stage then that would be great.

Thanks,

Leigh

---------- Weitergeleitete Nachricht ----------
From: "Wei, David" <david.wei at intel.com>
To: MinnowBoard Development and Community Discussion <
elinux-minnowboard at lists.elinux.org>
Cc:
Date: Mon, 18 May 2015 02:09:46 +0000
Subject: Re: [MinnowBoard] Info Windows
MinnowBoard Max has been verified with booting Windows 8.1 and Windows 10.
You could get free Windows 10 from
http://windows.microsoft.com/en-us/windows/preview-iso

(1) Just unzip the ISO image into the root directory of a USB harddisk.
(2)Then connect the USB harddisk to your MinnowBoard Max.  And connect a
USB keyboard to your MinnowBoard Max.
(3) power on the MinnowBoard Max and Keep pressing "F2" key of your
keyboard to enter BIOS Setup.
(4) Enter the "Boot Manager" page and select the USB harddisk to boot.
(5) Windows installation will begin.

Thanks,
David | SSG BIOS

-----Original Message-----
From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org]
On Behalf Of stefano.castelli at unipd.it
Sent: Wednesday, May 13, 2015 9:50 PM
To: elinux-minnowboard at lists.elinux.org
Subject: [MinnowBoard] Info Windows

Good morning,
we are from NEOS, an Italian society operating in the environmental field.
We would be interested in buying minnowboard max This is just to enquire
some information:

Would it be possible to install Windows on minnowboard max.?

If so:
-Which version?
-Where could we find it?
-How much does it cost?
-Do installation tutorials exist?

If no, would it be possible to use Windows through an emulator?

best regards

Stefano

_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard

---------- Weitergeleitete Nachricht ----------
From: "Wei, David" <david.wei at intel.com>
To: MinnowBoard Development and Community Discussion <
elinux-minnowboard at lists.elinux.org>
Cc:
Date: Mon, 18 May 2015 02:38:13 +0000
Subject: Re: [MinnowBoard] Silverjaw working?

Could you attach your mSATA to platform and boot into UEFI Shell? Then tell
us if any devices are listed by UEFI Shell?

How to boot to UEFI Shell

(1)    Power on the board and keep pressing “F2” key on your keyboard,
which will allow you to enter BIOS Setup.

(2)    Enter  “Boot Manager” of BIOS Setup, and then select UEFI Shell to
boot.

Thanks,

David | SSG BIOS

*From:* elinux-MinnowBoard [mailto:
elinux-minnowboard-bounces at lists.elinux.org] *On Behalf Of *Jeremy Hoel
*Sent:* Friday, May 15, 2015 1:44 PM
*To:* MinnowBoard Development and Community Discussion
*Subject:* Re: [MinnowBoard] Silverjaw working?

Sorry, I was out of town for a bit.

With no other devices attached, when I boot I see:

UEFI Interactive Shell

EDK II

EUFI v2.40 (EDK II, 0x00010000)

Error. No mapping gound

Press ESC to skip....

I get that with two different, known working mSata drives.

I get the same thing with no drive installed.

On Thu, May 7, 2015 at 11:30 AM, Bill Traynor <btraynor at gmail.com> wrote:

Hi Jeremy,

When the mSATA drive and mPCIe wireless card are plugged into the
Silverjaw and you power up the Max what happens?  Does the Max default
to the UEFI shell?  If it does, what is displayed?

On Thu, May 7, 2015 at 1:13 PM, nb <nb at dagami.org> wrote:
> Hi Jeremy,
>
> I’ve had sometimes non detected disks.
> Everytime it was a power supply issue.
> Hope this helps
>
> nb
>
>
>> Le 7 mai 2015 à 18:27, Jeremy Hoel <jthoel at gmail.com> a écrit :
>>
>> So i tested the mSata in another laptop and it worked, and i grabbed
that mSata (that was in the laptop and working) and tested it in the
silverjaw and it still wasn't detected by the firmware as a boot option, no
in the OS when live booed.  Is there something in the efi firmware settings
that I should make sure ie enabled?
>>
>> I'll give Mint a try and see if that finds the drive.
>>
>> On Thu, May 7, 2015 at 6:02 AM, Bill Traynor <btraynor at gmail.com> wrote:
>> Worked perfectly for me as well.  I have an Adata 120GB drive.
>> Installed Debian straight to it.
>>
>> On Thu, May 7, 2015 at 7:57 AM, Scott Guthrie <scottgu3 at gmail.com> wrote:
>> > Sounds like your best bet.  My crucial M550 worked perfectly, but I'm
also
>> > running Linux Mint 17.1 Rebecca (XFCE).
>> >
>> > Scott
>> >
>> > On Thu, May 7, 2015 at 1:18 AM, Jeremy Hoel <jthoel at gmail.com> wrote:
>> >>
>> >> Ok, well after talking with John, I upgraded my firmware from .73 to
.79.
>> >> I still can't see the msata, but i can see the wireless, so I'm going
to try
>> >> and find another msata to use to test.
>> >>
>> >>
>> >> On Wed, May 6, 2015 at 9:58 PM, Jeremy Hoel <jthoel at gmail.com> wrote:
>> >>>
>> >>> well unless the board is labeled wrong, it's in the msata slot.
look at
>> >>> it when it's attached, i's the slot on the left.
>> >>>
>> >>> On Wed, May 6, 2015 at 9:56 PM, Kevron Rees <tripzero.kev at gmail.com>
>> >>> wrote:
>> >>>>
>> >>>> Make sure the msata is in the msata slot not the mpcie...
>> >>>>
>> >>>> On May 6, 2015 8:50 PM, "Jeremy Hoel" <jthoel at gmail.com> wrote:
>> >>>>>
>> >>>>> So, I got my silverjaw and my nice new 3amp PS showed up today, so
I
>> >>>>> wanted to give it a go this evening.  I've got a Samsung mSata
256GB
>> >>>>> installed (MZ-MPC256D) but it seems like the CentOS installed
doesn't see
>> >>>>> it.
>> >>>>>
>> >>>>> Are their any particular firmware settings that need to be
installed
>> >>>>> for an OS to see the card?  I measured 3.3 and 5v at the test
points to the
>> >>>>> ground post, but no lights come on when the MBM is powered.  Is
there a
>> >>>>> power LED?
>> >>>>>
>> >>>>> Also, when testing with my xbmc ubuntu install (3.14.13 kernel) it
>> >>>>> doesn't see anything in dmesg for sda or msata.
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>>
>> >>>>> _______________________________________________
>> >>>>> elinux-MinnowBoard mailing list
>> >>>>> elinux-MinnowBoard at lists.elinux.org
>> >>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> >>>>>
>> >>>>
>> >>>> _______________________________________________
>> >>>> elinux-MinnowBoard mailing list
>> >>>> elinux-MinnowBoard at lists.elinux.org
>> >>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> >>>>
>> >>>
>> >>
>> >>
>> >> _______________________________________________
>> >> elinux-MinnowBoard mailing list
>> >> elinux-MinnowBoard at lists.elinux.org
>> >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> >>
>> >
>> >
>> > _______________________________________________
>> > elinux-MinnowBoard mailing list
>> > elinux-MinnowBoard at lists.elinux.org
>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>> >
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard

_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150518/1644801d/attachment-0001.html>