[MinnowBoard] Silverjaw working?

[Jeremy Hoel]

So, is it part of the Sata 1/2 options in the South Cluster Config?  Is
there something else in the Firmware that would show settings related to
the board speed/options?



On Fri, May 8, 2015 at 6:30 AM, Markus Maier <maier.m at web.de> wrote:

>
> > >> >>>> On May 6, 2015 8:50 PM, "Jeremy Hoel" <jthoel <at> gmail.com>
> wrote:
> > >> >>>>>
> > >> >>>>> So, I got my silverjaw and my nice new 3amp PS showed up today,
> so I
> > >> >>>>> wanted to give it a go this evening.  I've got a Samsung mSata
> 256GB
> > >> >>>>> installed (MZ-MPC256D) but it seems like the CentOS installed
> doesn't see
> > >> >>>>> it.
> > >> >>>>>
> > >> >>>>> Are their any particular firmware settings that need to be
> installed
> > >> >>>>> for an OS to see the card?  I measured 3.3 and 5v at the test
> points to the
> > >> >>>>> ground post, but no lights come on when the MBM is powered.  Is
> there a
> > >> >>>>> power LED?
> > >> >>>>>
> > >> >>>>> Also, when testing with my xbmc ubuntu install (3.14.13 kernel)
> it
> > >> >>>>> doesn't see anything in dmesg for sda or msata.
> > >> >>>>>
>
> just to be sure: SATA lanes are activeated in the system settings, right?
> The drive should show up there already. If it's not there, the OS will
> never
> see it.
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150514/b1646fa0/attachment.html>