[MinnowBoard] Silverjaw working?

[nb]

Hi Jeremy,

I’ve had sometimes non detected disks.
Everytime it was a power supply issue.
Hope this helps

nb


> Le 7 mai 2015 à 18:27, Jeremy Hoel <jthoel at gmail.com> a écrit :
> 
> So i tested the mSata in another laptop and it worked, and i grabbed that mSata (that was in the laptop and working) and tested it in the silverjaw and it still wasn't detected by the firmware as a boot option, no in the OS when live booed.  Is there something in the efi firmware settings that I should make sure ie enabled?
> 
> I'll give Mint a try and see if that finds the drive.
> 
> On Thu, May 7, 2015 at 6:02 AM, Bill Traynor <btraynor at gmail.com> wrote:
> Worked perfectly for me as well.  I have an Adata 120GB drive.
> Installed Debian straight to it.
> 
> On Thu, May 7, 2015 at 7:57 AM, Scott Guthrie <scottgu3 at gmail.com> wrote:
> > Sounds like your best bet.  My crucial M550 worked perfectly, but I'm also
> > running Linux Mint 17.1 Rebecca (XFCE).
> >
> > Scott
> >
> > On Thu, May 7, 2015 at 1:18 AM, Jeremy Hoel <jthoel at gmail.com> wrote:
> >>
> >> Ok, well after talking with John, I upgraded my firmware from .73 to .79.
> >> I still can't see the msata, but i can see the wireless, so I'm going to try
> >> and find another msata to use to test.
> >>
> >>
> >> On Wed, May 6, 2015 at 9:58 PM, Jeremy Hoel <jthoel at gmail.com> wrote:
> >>>
> >>> well unless the board is labeled wrong, it's in the msata slot.  look at
> >>> it when it's attached, i's the slot on the left.
> >>>
> >>> On Wed, May 6, 2015 at 9:56 PM, Kevron Rees <tripzero.kev at gmail.com>
> >>> wrote:
> >>>>
> >>>> Make sure the msata is in the msata slot not the mpcie...
> >>>>
> >>>> On May 6, 2015 8:50 PM, "Jeremy Hoel" <jthoel at gmail.com> wrote:
> >>>>>
> >>>>> So, I got my silverjaw and my nice new 3amp PS showed up today, so I
> >>>>> wanted to give it a go this evening.  I've got a Samsung mSata 256GB
> >>>>> installed (MZ-MPC256D) but it seems like the CentOS installed doesn't see
> >>>>> it.
> >>>>>
> >>>>> Are their any particular firmware settings that need to be installed
> >>>>> for an OS to see the card?  I measured 3.3 and 5v at the test points to the
> >>>>> ground post, but no lights come on when the MBM is powered.  Is there a
> >>>>> power LED?
> >>>>>
> >>>>> Also, when testing with my xbmc ubuntu install (3.14.13 kernel) it
> >>>>> doesn't see anything in dmesg for sda or msata.
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> elinux-MinnowBoard mailing list
> >>>>> elinux-MinnowBoard at lists.elinux.org
> >>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >>>>>
> >>>>
> >>>> _______________________________________________
> >>>> elinux-MinnowBoard mailing list
> >>>> elinux-MinnowBoard at lists.elinux.org
> >>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >>>>
> >>>
> >>
> >>
> >> _______________________________________________
> >> elinux-MinnowBoard mailing list
> >> elinux-MinnowBoard at lists.elinux.org
> >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >>
> >
> >
> > _______________________________________________
> > elinux-MinnowBoard mailing list
> > elinux-MinnowBoard at lists.elinux.org
> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> 
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard