[MinnowBoard] Can I extract a mSATA disk from 2.5" box ?

[Bill Traynor]

This page seems shows the internals of one of those drives and it
doesn't contain a mSATA drive:

http://www.hardwarecanucks.com/forum/hardware-canucks-reviews/59476-kingston-ssdnow-v300-120gb-ssd-review.html



On Tue, May 5, 2015 at 4:30 PM, Anders, David <david.anders at intel.com> wrote:
> Nb,
>
> I doubt that is the case that would add unnecessary expense to a device. Most likely it is just a standard PCB the size of an 2.5" HD with the flash soldered directly to it...
>
> Dave
>
> -----Original Message-----
> From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of nb
> Sent: Tuesday, May 5, 2015 3:28 PM
> To: MinnowBoard Development and Community Discussion
> Subject: Re: [MinnowBoard] Can I extract a mSATA disk from 2.5" box ?
>
> No Bill, it uses an ordinary data connector.
> My hope is that inside the disk, lies a mSATA disk
>
> Regards
>
> nb
>
>
>> Le 5 mai 2015 à 22:23, Bill Traynor <btraynor at gmail.com> a écrit :
>>
>> nb,
>>
>> You need a miniSATA (mSATA) SSD drive for the Silverjaw.  mSATA is
>> essentially SATA using a miniPCIe connector.  That is, the connector
>> is configured for the SATA lines.
>>
>> I don't think the Kingston SSDNOW 300 use a mPCIe connector, does it?
>>
>> On Tue, May 5, 2015 at 4:10 PM, nb <nb at dagami.org> wrote:
>>> KINGSTON SSDNOW 300 120GB
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard