[MinnowBoard] Can I extract a mSATA disk from 2.5" box ?

[Anders, David]

Nb,

I doubt that is the case that would add unnecessary expense to a device. Most likely it is just a standard PCB the size of an 2.5" HD with the flash soldered directly to it...

Dave 

-----Original Message-----
From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of nb
Sent: Tuesday, May 5, 2015 3:28 PM
To: MinnowBoard Development and Community Discussion
Subject: Re: [MinnowBoard] Can I extract a mSATA disk from 2.5" box ?

No Bill, it uses an ordinary data connector.
My hope is that inside the disk, lies a mSATA disk

Regards

nb


> Le 5 mai 2015 à 22:23, Bill Traynor <btraynor at gmail.com> a écrit :
> 
> nb,
> 
> You need a miniSATA (mSATA) SSD drive for the Silverjaw.  mSATA is 
> essentially SATA using a miniPCIe connector.  That is, the connector 
> is configured for the SATA lines.
> 
> I don't think the Kingston SSDNOW 300 use a mPCIe connector, does it?
> 
> On Tue, May 5, 2015 at 4:10 PM, nb <nb at dagami.org> wrote:
>> KINGSTON SSDNOW 300 120GB
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard

_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard