[MinnowBoard] MinnowBoard Max won't boot.

[John Hawley]

Have to ask the obvious, the adapter isn't backwards is it?  Assuming
you are getting both LEDs, and have at least a 2A 5V power supply hooked
up I'd expect at least a line or so across the serial console.

If you can't get anything out of the serial console, it's probably a
board that's gone bad :-/

- John

On 4/16/2015 2:34 PM, Eric Owens wrote:
> Between tax day and a three days of a horrendous project schedule, I was
> finally able to get back to this.
> 
>  
> 
> I have an OSEPP FTDI breakout board, which I used to connect to the MBM
> 
>  
> 
> Port settings:
> 
>  
> 
> 115200
> 
> N81
> 
> no flow control
> 
>  
> 
> Tried it on two different computers Win7 & Win8.1 using both Telnet & Putty
> 
>  
> 
> Unable to connect to the MBM
> 
>  
> 
>  
> 
> *From:*elinux-MinnowBoard
> [mailto:elinux-minnowboard-bounces at lists.elinux.org] *On Behalf Of
> *Anders, David
> *Sent:* Monday, April 13, 2015 12:47 PM
> *To:* MinnowBoard Development and Community Discussion
> *Subject:* Re: [MinnowBoard] MinnowBoard Max won't boot.
> 
>  
> 
> You should start off with the UART console to determine if the device is
> booting:
> 
>  
> 
> http://elinux.org/Minnowboard:MinnowMax#6-Wire_Serial_Console
> 
>  
> 
> Dave
> 
>  
> 
>  
> 
>  
> 
> *From:*elinux-MinnowBoard
> [mailto:elinux-minnowboard-bounces at lists.elinux.org] *On Behalf Of *Eric
> owens
> *Sent:* Monday, April 13, 2015 2:46 PM
> *To:* MinnowBoard Development and Community Discussion
> *Subject:* Re: [MinnowBoard] MinnowBoard Max won't boot.
> 
>  
> 
> Ok, I guess it's an HDMI issue.  Another responder suggested a different
> cable/adapter.  Any specific suggestions here?  If that doesn't work,
> what next?
> 
> Thanks
> 
> ------------------------------------------------------------------------
> 
> *From: *Michael <mailto:michael at kmaclub.com>
> *Sent: *‎4/‎13/‎2015 11:51 AM
> *To: *MinnowBoard Development and Community Discussion
> <mailto:elinux-minnowboard at lists.elinux.org>
> *Subject: *Re: [MinnowBoard] MinnowBoard Max won't boot.
> 
> On 04/13/2015 11:47 AM, ericolv at cox.net <mailto:ericolv at cox.net> wrote:
>> Ok, thanks for the reply.
>>
>> I haven't seen anything on my screen at all.  Am I correct in assuming
> that I should, at least, see the shell, without any sd card or usb stick?
>>
>>
> 
> 
> Yes, you should get the shell without any SD card or USB stick.
> 
> I regularly netboot mine without having either inserted and I can
> interact with the console.
> 
> Michael
> 
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> <mailto:elinux-MinnowBoard at lists.elinux.org>
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> 
> 
> 
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>