[MinnowBoard] MinnowBoard Max won't boot.

[Eric Owens]

Between tax day and a three days of a horrendous project schedule, I was finally able to get back to this.

 

I have an OSEPP FTDI breakout board, which I used to connect to the MBM

 

Port settings:

 

115200

N81 

no flow control

 

Tried it on two different computers Win7 & Win8.1 using both Telnet & Putty

 

Unable to connect to the MBM

 

 

From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Anders, David
Sent: Monday, April 13, 2015 12:47 PM
To: MinnowBoard Development and Community Discussion
Subject: Re: [MinnowBoard] MinnowBoard Max won't boot.

 

You should start off with the UART console to determine if the device is booting:

 

http://elinux.org/Minnowboard:MinnowMax#6-Wire_Serial_Console

 

Dave

 

 

 

From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Eric owens
Sent: Monday, April 13, 2015 2:46 PM
To: MinnowBoard Development and Community Discussion
Subject: Re: [MinnowBoard] MinnowBoard Max won't boot.

 

Ok, I guess it's an HDMI issue.  Another responder suggested a different cable/adapter.  Any specific suggestions here?  If that doesn't work, what next?

Thanks

  _____  

From: Michael <mailto:michael at kmaclub.com> 
Sent: ‎4/‎13/‎2015 11:51 AM
To: MinnowBoard Development and Community Discussion <mailto:elinux-minnowboard at lists.elinux.org> 
Subject: Re: [MinnowBoard] MinnowBoard Max won't boot.

On 04/13/2015 11:47 AM, ericolv at cox.net <mailto:ericolv at cox.net>  wrote:
> Ok, thanks for the reply.
>
> I haven't seen anything on my screen at all.  Am I correct in assuming that I should, at least, see the shell, without any sd card or usb stick?
>
>


Yes, you should get the shell without any SD card or USB stick.

I regularly netboot mine without having either inserted and I can 
interact with the console.

Michael

_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org <mailto:elinux-MinnowBoard at lists.elinux.org> 
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150416/38284f00/attachment.html>