[MinnowBoard] [edk2] [EDK2][MNW2]: Problem building MinnowMAX firmware 0.77 on Windows.

Thu Mar 5 04:50:39 UTC 2015

OK – after starting over and (more!) carefully following all the instructions (and advice here!), I got a LOT further (probably close to the end).

BUT now I get this error:

Building ... c:\.....\myworkspace\EdkCompatibilityPkg\Compatibility\AcpiVariableHobOnSm

ramReserveHobThunk\AcpiVariableHobOnSmramReserveHobThunk.inf [IA32]

NMAKE : fatal error U1073: don't know how to make 'c:\......\myworkspace\Build\Vlv2TbltD

evicePkg\RELEASE_VS2013x86\IA32\EdkCompatibilityPkg\Compatibility\AcpiVariableHo

bOnSmramReserveHobThunk\AcpiVariableHobOnSmramReserveHobThunk\DEBUG\AutoGen.h'

Stop.

Anyone have any idea what is causing this!?

Thanks!

Gerard

From: Andrew Fish [mailto:afish at apple.com] 
Sent: Wednesday, March 4, 2015 1:20 AM
To: gerard.b at tekmagic.net; edk2-devel at lists.sourceforge.net
Cc: Wei, David; MinnowBoard Development and Community Discussion
Subject: Re: [edk2] [MinnowBoard] [EDK2][MNW2]: Problem building MinnowMAX firmware 0.77 on Windows.

On Mar 3, 2015, at 9:54 PM, Gerard Bucas <gerard.b at tekmagic.net <mailto:gerard.b at tekmagic.net> > wrote:

Hi David

I am pretty sure I followed those instructions exactly. The only difference is that I have a slightly newer version of VS (which I resolved) and a Python (still V2.X so should be OK).

I downloaded the svn from that link that you mention, so I assume that I didn’t get a newer version? How can I check that to make sure?

Gerard,

I’ve not used svn in a long time (git rocks), but the branch has revisions too. So downloading the URL gets you the TOT of the branch. Did you specify a revision?

svn checkout -r 16679   <https://svn.code.sf.net/p/edk2/code/branches/UDK2014.SP1> https://svn.code.sf.net/p/edk2/code/branches/UDK2014.SP1

I think you can update via:

svn update -r 16679

Not sure if you have the Unix like command line svn, or you are using some other tool, but the concept should be the same.

Thanks,

PS This project is a big mess. They should have just checked in a branch of the edk2 that had all their stuff and pointed you at a single pull. All the other Packages in the TOT of the edk2 have to compile with the TOT, some how this one is special? it is only going to get worse if every package maintainer starts making up bizarre rules to match their internal closed source project  process (branch early, branch often, never merge with TOT, when possible distribute ZIP files of code, don’t use internal what you ship to customers) and try to call it open source. 

Thanks!

Gerard

From: Wei, David [ <mailto:david.wei at intel.com> mailto:david.wei at intel.com] 
Sent: Wednesday, March 4, 2015 12:44 AM
To:  <mailto:gerard.b at tekmagic.net> gerard.b at tekmagic.net; MinnowBoard Development and Community Discussion;  <mailto:edk2-devel at lists.sourceforge.net> edk2-devel at lists.sourceforge.net
Subject: RE: [MinnowBoard] [EDK2][MNW2]: Problem building MinnowMAX firmware 0.77 on Windows.

Hi,

Please following below two steps to get source code.  The 0.77 is based on "Revision 16679 of UDK2014.SP1 branch  <https://svn.code.sf.net/p/edk2/code/branches/UDK2014.SP1> https://svn.code.sf.net/p/edk2/code/branches/UDK2014.SP1 ".  Please do not get newer version. 

2. Create the following folders (sub-directories) from your workspace (e.g. "C:\MyWorkspace"):

       BaseTools               

       Conf                    

       CryptoPkg               

       EdkCompatibilityPkg     

       EdkShellBinPkg          

       FatBinPkg               

       IntelFrameworkModulePkg 

       IntelFrameworkPkg       

       MdeModulePkg            

       MdePkg                  

       NetworkPkg              

       PcAtChipsetPkg          

       PerformancePkg          

       SecurityPkg             

       ShellBinPkg             

       ShellPkg                

       SourceLevelDebugPkg     

       UefiCpuPkg

       Vlv2DeviceRefCodePkg

       Vlv2TbltDevicePkg    

3. Obtain the following BSD-licensed source code packages and files from the  <http://tianocore.org/> tianocore.org (hosted by  <http://sourceforge.net/> sourceforge.net)

   SVN (SubVersion) repository and place them into their respective folders (subdirectories) created in

   step 2 (above):  

   "Revision 16679 of UDK2014.SP1 branch  <https://svn.code.sf.net/p/edk2/code/branches/UDK2014.SP1> https://svn.code.sf.net/p/edk2/code/branches/UDK2014.SP1 "

Thanks,

David | SSG BIOS

From: elinux-MinnowBoard [ <mailto:elinux-minnowboard-bounces at lists.elinux.org> mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Gerard Bucas
Sent: Wednesday, March 04, 2015 1:35 PM
To:  <mailto:edk2-devel at lists.sourceforge.net> edk2-devel at lists.sourceforge.net
Cc: 'MinnowBoard Development and Community Discussion'
Subject: Re: [MinnowBoard] [EDK2][MNW2]: Problem building MinnowMAX firmware 0.77 on Windows.

Can anyone help with resolving this error when trying to build 0.77 firmware on Windows:

build...

…\myworkspace\EdkCompatibilityPkg\Compatibility\SmmBaseHelper\SmmBaseHelper

.inf(66): error 4000: Value of Guid [gEdkiiMemoryProfileGuid] is not found under

[Guids] section in  …..\myworkspace\MdePkg\MdePkg.dec

Thanks!

Regards

Gerard

From: B Cran [ <mailto:bruce.cran at gmail.com> mailto:bruce.cran at gmail.com] 
Sent: Tuesday, March 3, 2015 1:11 AM
To:  <mailto:gerard.b at tekmagic.net> gerard.b at tekmagic.net
Cc:  <mailto:edk2-devel at lists.sourceforge.net> edk2-devel at lists.sourceforge.net; MinnowBoard Development and Community Discussion
Subject: Re: [MinnowBoard] [EDK2][MNW2]: Problem building MinnowMAX firmware 0.77 on Windows.

On Monday, March 2, 2015, Gerard Bucas < <mailto:gerard.b at tekmagic.net> gerard.b at tekmagic.net> wrote:

: error 000E: File/directory not found in workspace

        c:\...........\myworkspace\Vlv2BinaryPkg\X64RELEASE\IA32\PchSmbusArpDisabled.inf

I do not have the “….\myworkspace\Vlv2BinaryPkg\” directory.

 This isn't really an edk2 issue - the Vlv2BinaryPkg tree contains the binary objects ('blobs') and is distributed separately from the main BIOS code. You can get it from  <http://firmware.intel.com/sites/default/files/MinnowBoard_MAX-0.77-Binary.Objects.zip> http://firmware.intel.com/sites/default/files/MinnowBoard_MAX-0.77-Binary.Objects.zip . You should also read  <http://firmware.intel.com/sites/default/files/MinnowBoard_MAX_Rev.077-ReleaseNotes.txt> http://firmware.intel.com/sites/default/files/MinnowBoard_MAX_Rev.077-ReleaseNotes.txt for build instructions (e.g. Patching OpenSSL).

-- 

Bruce

------------------------------------------------------------------------------
Dive into the World of Parallel Programming The Go Parallel Website, sponsored
by Intel and developed in partnership with Slashdot Media, is your hub for all
things parallel software development, from weekly thought leadership blogs to
news, videos, case studies, tutorials and more. Take a look and join the 
conversation now.  <http://goparallel.sourceforge.net/_______________________________________________> http://goparallel.sourceforge.net/_______________________________________________
edk2-devel mailing list
 <mailto:edk2-devel at lists.sourceforge.net> edk2-devel at lists.sourceforge.net
 <https://lists.sourceforge.net/lists/listinfo/edk2-devel> https://lists.sourceforge.net/lists/listinfo/edk2-devel

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150304/179f4c70/attachment-0001.html>