[MinnowBoard] [EDK2][MNW2]: Problem building MinnowMAX firmware 0.77 on Windows.

[Gerard Bucas]

Thanks David - that helps a lot!

Will re-download tomorrow keeoing in mind all the things I have now learnt. 

Much appreciated..

Gerard 

> On Mar 4, 2015, at 1:48 AM, Wei, David <david.wei at intel.com> wrote:
> 
> gEdkiiMemoryProfileGuid are introduced by Revision 16707, So I am afraid you do use a newer reversion.
>  
>  
> <image001.png>
>  
>  
>  
> Right click SmmBaseHelper.inf and use TotoiseSVN->Showlog to check the revision of this file.
>  
>  
> When check out UDK2014.SP1, please specify the desired revision as below:
>  
> <image002.png>
>  
> Thanks,
> David | SSG BIOS
>  
> From: Gerard Bucas [mailto:gerard.b at tekmagic.net] 
> Sent: Wednesday, March 04, 2015 1:54 PM
> To: Wei, David; edk2-devel at lists.sourceforge.net
> Cc: 'MinnowBoard Development and Community Discussion'
> Subject: RE: [MinnowBoard] [EDK2][MNW2]: Problem building MinnowMAX firmware 0.77 on Windows.
>  
> Hi David
>  
> I am pretty sure I followed those instructions exactly. The only difference is that I have a slightly newer version of VS (which I resolved) and a Python (still V2.X so should be OK).
>  
> I downloaded the svn from that link that you mention, so I assume that I didn’t get a newer version? How can I check that to make sure?
>  
> Thanks!
>  
> Gerard
>  
> From: Wei, David [mailto:david.wei at intel.com] 
> Sent: Wednesday, March 4, 2015 12:44 AM
> To: gerard.b at tekmagic.net; MinnowBoard Development and Community Discussion; edk2-devel at lists.sourceforge.net
> Subject: RE: [MinnowBoard] [EDK2][MNW2]: Problem building MinnowMAX firmware 0.77 on Windows.
>  
> Hi,
>  
> Please following below two steps to get source code.  The 0.77 is based on "Revision 16679 of UDK2014.SP1 branch https://svn.code.sf.net/p/edk2/code/branches/UDK2014.SP1 ".  Please do not get newer version.
>  
>  
> 2. Create the following folders (sub-directories) from your workspace (e.g. "C:\MyWorkspace"):
>  
>        BaseTools              
>        Conf                   
>        CryptoPkg              
>        EdkCompatibilityPkg    
>        EdkShellBinPkg         
>        FatBinPkg              
>        IntelFrameworkModulePkg
>        IntelFrameworkPkg      
>        MdeModulePkg           
>        MdePkg                 
>        NetworkPkg             
>        PcAtChipsetPkg         
>        PerformancePkg         
>        SecurityPkg            
>        ShellBinPkg            
>        ShellPkg               
>        SourceLevelDebugPkg    
>        UefiCpuPkg
>        Vlv2DeviceRefCodePkg
>        Vlv2TbltDevicePkg   
>        
> 3. Obtain the following BSD-licensed source code packages and files from the tianocore.org (hosted by sourceforge.net)
>    SVN (SubVersion) repository and place them into their respective folders (subdirectories) created in
>    step 2 (above): 
>    
>    "Revision 16679 of UDK2014.SP1 branch https://svn.code.sf.net/p/edk2/code/branches/UDK2014.SP1 "
>  
>  
>  
> Thanks,
> David | SSG BIOS
>  
> From: elinux-MinnowBoard [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Gerard Bucas
> Sent: Wednesday, March 04, 2015 1:35 PM
> To: edk2-devel at lists.sourceforge.net
> Cc: 'MinnowBoard Development and Community Discussion'
> Subject: Re: [MinnowBoard] [EDK2][MNW2]: Problem building MinnowMAX firmware 0.77 on Windows.
>  
> Can anyone help with resolving this error when trying to build 0.77 firmware on Windows:
>  
> build...
> …\myworkspace\EdkCompatibilityPkg\Compatibility\SmmBaseHelper\SmmBaseHelper
> .inf(66): error 4000: Value of Guid [gEdkiiMemoryProfileGuid] is not found under
> [Guids] section in  …..\myworkspace\MdePkg\MdePkg.dec
> 
> Thanks!
>  
> Regards
>  
> Gerard
>  
> From: B Cran [mailto:bruce.cran at gmail.com] 
> Sent: Tuesday, March 3, 2015 1:11 AM
> To: gerard.b at tekmagic.net
> Cc: edk2-devel at lists.sourceforge.net; MinnowBoard Development and Community Discussion
> Subject: Re: [MinnowBoard] [EDK2][MNW2]: Problem building MinnowMAX firmware 0.77 on Windows.
>  
> On Monday, March 2, 2015, Gerard Bucas <gerard.b at tekmagic.net> wrote:
> : error 000E: File/directory not found in workspace
>         c:\...........\myworkspace\Vlv2BinaryPkg\X64RELEASE\IA32\PchSmbusArpDisabled.inf
>  
> I do not have the “….\myworkspace\Vlv2BinaryPkg\” directory.
>  
>  This isn't really an edk2 issue - the Vlv2BinaryPkg tree contains the binary objects ('blobs') and is distributed separately from the main BIOS code. You can get it from http://firmware.intel.com/sites/default/files/MinnowBoard_MAX-0.77-Binary.Objects.zip . You should also read http://firmware.intel.com/sites/default/files/MinnowBoard_MAX_Rev.077-ReleaseNotes.txt for build instructions (e.g. Patching OpenSSL).
>  
> -- 
> Bruce
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150304/b77b1af0/attachment-0001.html>