[MinnowBoard] [edk2] [EDK2][MNW2]: Problem building MinnowMAX firmware 0.77 on Windows.

Gerard Bucas gerard.b at tekmagic.net
Fri Feb 27 16:49:40 UTC 2015


Thanks David,

 

Stupid question:

Which Windows “tool” can import from that “svn” webpage? 

 

I tried TortoiseSVN but it asks for username/pwd and my sourceforge credentials don’t work on it. So can’t seem to be able to import anything from that link (that’s why I eventually landed up using http://sourceforge.net/projects/edk2/files/UDK2014_Releases/UDK2014.SP1.P1/UDK2014.SP1.P1.Complete.MyWorkSpace.zip/download  - which has those two directories missing).

 

Its probably me but any help would be appreciated!

 

Regards

 

Gerard

 

 

From: Wei, David [mailto:david.wei at intel.com] 
Sent: Friday, February 27, 2015 3:58 AM
To: gerard.b at tekmagic.net; edk2-devel at lists.sourceforge.net
Cc: 'MinnowBoard Development and Community Discussion'; Wu, Mike
Subject: RE: [edk2] [EDK2][MNW2]: Problem building MinnowMAX firmware 0.77 on Windows.

 

Please follow following two steps of the release note to get Vlv2DeviceRefCodePkg and Vlv2TbltDevicePkg from https://svn.code.sf.net/p/edk2/code/branches/UDK2014.SP1.     

 

 

2. Create the following folders (sub-directories) from your workspace (e.g. "C:\MyWorkspace"):

 

       BaseTools               

       Conf                    

       CryptoPkg               

       EdkCompatibilityPkg     

       EdkShellBinPkg          

       FatBinPkg               

       IntelFrameworkModulePkg 

       IntelFrameworkPkg       

       MdeModulePkg            

       MdePkg                  

       NetworkPkg              

       PcAtChipsetPkg          

       PerformancePkg          

       SecurityPkg             

       ShellBinPkg             

       ShellPkg                

       SourceLevelDebugPkg     

       UefiCpuPkg

       Vlv2DeviceRefCodePkg

       Vlv2TbltDevicePkg    

       

3. Obtain the following BSD-licensed source code packages and files from the tianocore.org (hosted by sourceforge.net)

   SVN (SubVersion) repository and place them into their respective folders (subdirectories) created in

   step 2 (above):  

   

   "Revision 16679 of UDK2014.SP1 branch https://svn.code.sf.net/p/edk2/code/branches/UDK2014.SP1 "

 

 

 

Thanks,

David | SSG BIOS

 

From: Gerard Bucas [mailto:gerard.b at tekmagic.net] 
Sent: Friday, February 27, 2015 3:31 PM
To: edk2-devel at lists.sourceforge.net <mailto:edk2-devel at lists.sourceforge.net> 
Cc: 'MinnowBoard Development and Community Discussion'
Subject: Re: [edk2] [EDK2][MNW2]: Problem building MinnowMAX firmware 0.77 on Windows.

 

Additional Info relating to my earlier questions:

 

I populated the “MyWorkspace” directories/files from:

http://www.tianocore.org/udk2014/ 

which provides this link for downloading:

http://sourceforge.net/projects/edk2/files/UDK2014_Releases/UDK2014.SP1.P1/UDK2014.SP1.P1.Complete.MyWorkSpace.zip/download 

 

The above “UDK2014.SP1.P1.Complete.MyWorkSpace.zip” file does not seem to include the two required:

-          MyWorkspace/Vlv2TbltDevicePkg
and

-          MyWorkspace/ Vlv2DeviceRefCodePkg 

 

directories/contents.

 

From: Gerard Bucas [mailto:gerard.b at tekmagic.net] 
Sent: Friday, February 27, 2015 1:44 AM
To: edk2-devel at lists.sourceforge.net <mailto:edk2-devel at lists.sourceforge.net> 
Cc: 'MinnowBoard Development and Community Discussion'
Subject: [EDK2][MNW2]: Problem building MinnowMAX firmware 0.77 on Windows.

 

Hi guys,

 

I am trying to build the minnowMAX firmware (latest v0.77) and have followed the instructions found here:

http://firmware.intel.com/sites/default/files/MinnowBoard_MAX_Rev.077-ReleaseNotes.txt

 

However, I got stuck on the last step, which says:

 

1) To build a release version:

      Open a command prompt window (make certain you "Run as Administrator"). 

      Type the command: "cd C:\MyWorkspace\Vlv2TbltDevicePkg" 

      Type the command "Build_IFWI.bat MNW2 Release" to build a release version.

 

The problem is that the directory “Vlv2TbltDevicePkg” in MyWorkspace is empty and there is no reference to it in any of the previous steps. So my question is:

 

1.     How do I get/create the contents for this directory: Vlv2TbltDevicePkg 
(& this one Vlv2DeviceRefCodePkg )?

2.     Will it correctly setup/run the build scripts when using Visual Studio Community (instead of the very old Visual Studio 2008 which is the recommended default)?

3.     Any other tips & tricks?

 

Thanks

 

Gerard Bucas  

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150227/643b8bf3/attachment-0001.html>


More information about the elinux-MinnowBoard mailing list