[MinnowBoard] Advice for a SATA board to connect to the PCIe connector of MinnowBoard MAX

[nb]

Thanks Michael for your very fast reply.
The board seems good, and the price is correct $50. But shipment to France from Technodisti is $95, twice the board price.
So I’ll wait some time

Thanks again

Regards

nb

> Le 18 févr. 2015 à 22:12, Michael Jones <mike at proclivis.com> a écrit :
> 
> I’m using the Lure with a solid state drive without problems. I got MBM-LURE-FLOTSAM from Techno Disti. Running on MinnowBoardMax
> 
> On Feb 18, 2015, at 1:56 PM, nb <nb at dagami.org> wrote:
> 
>> Hi,
>> 
>> I use a MinnowBoard MAX with a 2.5" SSD.
>> The disk is in a box with USB 3.0 output and connected to the MNB USB 3.0 port.
>> I would like to know if there’s a board which can be connected to the PCIe connector located at the bottom of the bord.
>> This board should have a SATA connector for plugin the disk.
>> My goal is to use the minimum space, and put the two boards in a case. An other one is to free the USB 3.0 connector.
>> I use the MNB as a small fanless server at home.
>> 
>> I’ve thought of using the SATA connector, but the cable would take too much space, and I would have to solve the power problem.
>> 
>> Do you know if such a board exists. I’ve found one (lure), but it seems to be for the MNB V1.
>> 
>> Thanks in advance
>> 
>> Regards
>> 
>> nb
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> 
> 
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard