[MinnowBoard] Advice for a SATA board to connect to the PCIe connector of MinnowBoard MAX

[Michael Jones]

I’m using the Lure with a solid state drive without problems. I got MBM-LURE-FLOTSAM from Techno Disti. Running on MinnowBoardMax

On Feb 18, 2015, at 1:56 PM, nb <nb at dagami.org> wrote:

> Hi,
> 
> I use a MinnowBoard MAX with a 2.5" SSD.
> The disk is in a box with USB 3.0 output and connected to the MNB USB 3.0 port.
> I would like to know if there’s a board which can be connected to the PCIe connector located at the bottom of the bord.
> This board should have a SATA connector for plugin the disk.
> My goal is to use the minimum space, and put the two boards in a case. An other one is to free the USB 3.0 connector.
> I use the MNB as a small fanless server at home.
> 
> I’ve thought of using the SATA connector, but the cable would take too much space, and I would have to solve the power problem.
> 
> Do you know if such a board exists. I’ve found one (lure), but it seems to be for the MNB V1.
> 
> Thanks in advance
> 
> Regards
> 
> nb
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard