[MinnowBoard] compiling fw

[John Loucaides]

1. Which version of firmware are you building?
0.76 from here:
http://firmware.intel.com/sites/default/files/MinnowBoard_MAX.Rev_.0.76.zip

2. Which command do you run to build the firmware
. Build_IFWI.sh MNW2 Debug

3. Which compiler are you using?
GCC

4. Which file are you loading onto the Minnowboard Max?
Stitch/MNW2MAX_X64_D_0076_01_GCC.bin


Thanks!



On Mon, Feb 16, 2015 at 3:33 PM, B Cran <bruce.cran at gmail.com> wrote:

> I have. Some questions:
>
> 1. Which version of firmware are you building?
> 2. Which command do you run to build the firmware
> 3. Which compiler are you using?
> 4. Which file are you loading onto the Minnowboard Max?
>
> --
> Bruce
>
> On Mon, Feb 16, 2015 at 4:00 PM, Zathros <zathros at gmail.com> wrote:
>
>> Have others had success compiling the fw from
>> http://firmware.intel.com/projects/minnowboard-max and loading it onto
>> the MinnowBoard Max?
>>
>> When I compile, I end up with a smaller file (5242880 bytes) and flashrom
>> is unhappy with this. If I try to extend the file size, then flashrom will
>> accept it, but it doesn't work. Loading the debug/release images (8388608
>> bytes) using flashrom is working fine, though. Any idea what I'm missing?
>>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150216/ba46193a/attachment.html>