[MinnowBoard] The LSE pin25 should be GPIO_S5_2

[John Hawley]

Updated, apparently the original schematic I wrote that based on had it
as a different pin.  Thanks!

- John

On 02/08/2015 11:07 PM, Yong Li wrote:
>  
> 
> Just FYI, On http://www.elinux.org/Minnowboard:MinnowMax, there is an
> incorrect pin description:
> 
> GPIO / Wakeup
> 
> 	
> 
> GPIO_S5_4
> 
> 	
> 
> 25
> 
> Checked on the Schematic (PDF)
> <http://www.elinux.org/images/f/ff/002-0004205_reva2_SCH_PUBLIC.pdf>,
> the pin 25 of LSE should be GPIO_S5_2. If can modify this page, it will
> be helpful. 
> 
> 
> 
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>