[MinnowBoard] Max doesnt boot mint qiana from microsd

[Bastian Wassermann]

After about 1 minute I get a message (very short displayed,I had to film
that)
.PXE-E18: Server response timeout. Boot failed. EFI Network.

After that it appears the efi shell, with device mapping and a list:
Fs0
Blk0
Blk1
Blk2
Blk3
Am 14.11.2014 01:05 schrieb "John 'Warthog9' Hawley" <
warthog19 at eaglescrag.net>:

> On 11/13/2014 04:01 PM, Bastian Wassermann wrote:
> > I installed the linux mint qiana from an usb stick and everything looked
> > fine. But after restart the max didnt boot in linux, but in the shell.
> > The blk devices are shown but nothing listed in them. Is there something
> > I miss in installation? Another question, how can I see, which firmware
> > is flashed.
>
> Answering your second question first:
>
> http://elinux.org/Minnowboard:MaxBios#UEFI_Version
>
> and answering your first question second:
>
> what are you getting exactly, are you making it to the uefi shell and
> it's just not automatically jumping to the disk (which is a wrong boot
> order problem likely), does it start booting but kernel panic (likely
> being a missing sdio driver in the initrd for the sdcard to get the root
> partition)?  Need a bit more information on what you are / aren't seeing
> and where you are getting to.
>
> - John 'Warthog9' Hawley
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20141114/3b034c78/attachment.html>