[MinnowBoard] J2 for powering a ssd

[Arne Gollin]

Hey, i wanted to power a SSD using the j2 Pins which provide 5v usually for
a fan. I bought a SSD which at max uses 0.5 watts... So this should be fine
since the Pins provide 1 A. But when i plug in the SSD and start the board
is always shortcuts. I tried to use the j5 or j6 the one with 5v, and this
would work when it would provide more amper.
So what is wrong with the j2 Pins? I tested my cable but this seems to be
OK.

Cheers,
Arne
Am 07.11.2014 13:00 schrieb <elinux-minnowboard-request at lists.elinux.org>:

> Send elinux-MinnowBoard mailing list submissions to
>         elinux-minnowboard at lists.elinux.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> or, via email, send a message with subject or body 'help' to
>         elinux-minnowboard-request at lists.elinux.org
>
> You can reach the person managing the list at
>         elinux-minnowboard-owner at lists.elinux.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of elinux-MinnowBoard digest..."
>
> Today's Topics:
>
>    1. PXE boot Linux (David Byte)
>
>
> ---------- Weitergeleitete Nachricht ----------
> From: David Byte <dbyte at suse.com>
> To: elinux-minnowboard at lists.elinux.org
> Cc:
> Date: Thu, 06 Nov 2014 21:53:03 -0600
> Subject: [MinnowBoard] PXE boot Linux
> If anyone has a process to PXE boot linux on the Minnowboard Max, I would
> love to see it.  I am working on getting SLES12 booting via PXE with them
> and hope I don't have to break new ground the entire way.
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20141107/a83b65ea/attachment.html>