[MinnowBoard] DDR3L connection to SoC

[zero0d]

David Andreas,

Thanks for pointing me to the micron document , I will read it.

I have another question about the DDI1 port that is not used on minnowboard.
You connected the DDI1_HPD to gnd (so says the Platform design guide) but
the HPD is an active low signal and my guess to deactivate it should be
connected to V1P8_S3 trough 10K or 100K?

Best regards.



--
View this message in context: http://minnowboard.57273.x6.nabble.com/MinnowBoard-DDR3L-connection-to-SoC-tp709p713.html
Sent from the MinnowBoard mailing list archive at Nabble.com.