[MinnowBoard] Programming flash

Peter Ogden peter.j.ogden at gmail.com
Wed Nov 5 03:37:10 UTC 2014


Here is the Flyswatter2 JTAG Pinout:
http://www.tincantools.com/assets/Flyswatter2%20-%2020%20Pin%20JTAG%20Connector.pdf

Links to some more info is on this page:
http://www.tincantools.com/JTAG/Flyswatter2.html

Haven't tried it myself yet.

-Peter


On Tue, Nov 4, 2014 at 7:02 PM, Robert Johnston <robert at layer2.com> wrote:

> Hi,
>
>
>
> Documentation (such as http://www.elinux.org/Minnowboard:SPI_Boot_flash)
> indicates that the Minnowboad flash can be programmed using the TinCanTools
> Flyswatter2.  But I have been unable to find either a schematic or actual
> cable to connect from the Flyswatter 20 pin JTAG connector to the
> Minnowboard 8 pin SPI connector (or even determine if those are the right
> connectors to use).  Can anyone point me in the right direction?
>
>
>
> Thanks
>
>
>
> Robert
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20141104/cf2e08e6/attachment-0001.html>


More information about the elinux-MinnowBoard mailing list