[MinnowBoard] DDR3L connection to SoC

David Anders danders at circuitco.com
Tue Nov 4 17:10:06 UTC 2014


there is complete description of the termination and voltage rules for
implementation of DDR3 and DDR3L memories provided by micron:


in addition, design details for Baytrail-I based platforms can be found here:



> On November 4, 2014 at 4:46 AM David Vrtaric <dawid.wrtaric at hotmail.com>
> wrote:
> Hi MinnowMaxBoard,
> We ordered the minnowmaxboard on mouser, and we are trying to create a board
> similar to minnow board.And I have a question for the ddr3l connection to SoC,
> specific the termination resistors on sheet 13 in the schematic downloaded
> from wiki, why are they necessary and I see they are connected to VDIMM_VTT ,
> what is the voltage of VDIMM_VTT? And about the caps connected between
> VDIMM_VTT and GND what are they for?
> Best Regards.  		 	   		  _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard

More information about the elinux-MinnowBoard mailing list