[MinnowBoard] MAX at 90ºC

Jeremy Hoel jthoel at gmail.com
Mon Oct 27 05:27:16 UTC 2014


I think I hit 81 at the highest.. it's a rev___  no rev entered.    putting
a small fan over the cpu dropped it down to under 60. I might tap into that
for the fan and keep running off the SD.

On Sun, Oct 26, 2014 at 11:22 PM, Thiago Tenório Jordão de Vasconcelos <
thiagottjv at gmail.com> wrote:

> The temp keeps rising or it stopped at ~78ºC?
>
> What is you board revision?
>
> Thanks!
>
> Thiago Vasconcelos
>
> On Mon, Oct 27, 2014 at 2:18 AM, Jeremy Hoel <jthoel at gmail.com> wrote:
>
>> Ok.. so right now at idle its
>> root at xbmc:~# uname -a
>> Linux xbmc 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014
>> x86_64 x86_64 x86_64 GNU/Linux
>>
>>
>> root at xbmc:~# sensors
>> acpitz-virtual-0
>> Adapter: Virtual device
>> temp1:        +26.8°C  (crit = +90.0°C)
>>
>> coretemp-isa-0000
>> Adapter: ISA adapter
>> Core 0:       +53.0°C  (high = +110.0°C, crit = +110.0°C)
>> Core 2:       +52.0°C  (high = +110.0°C, crit = +110.0°C)
>>
>>
>> using xbmc and playing a x264 mkv 1080p movie (6.5gb) for about 15
>> minutes..
>> top is around  0.55, 0.34, 0.16  depending on the area.. anywhere between
>> .3 and .6
>> and sensors shows
>>
>> root at xbmc:~# sensors
>> acpitz-virtual-0
>> Adapter: Virtual device
>> temp1:        +26.8°C  (crit = +90.0°C)
>>
>> coretemp-isa-0000
>> Adapter: ISA adapter
>> Core 0:       +78.0°C  (high = +110.0°C, crit = +110.0°C)
>> Core 2:       +76.0°C  (high = +110.0°C, crit = +110.0°C)
>>
>> The heat sink reads about 125f on the metal.
>>
>>
>> Seeing the above note about a 3.14 kernel makes me want to find a newer
>> one and try it out.
>>
>> On Sun, Oct 26, 2014 at 10:33 PM, Thiago Tenório Jordão de Vasconcelos <
>> thiagottjv at gmail.com> wrote:
>>
>>> Hi guys,
>>>
>>> I installed the Windows 10 and updated the firmware to the 0.73.
>>> Using the software RealTemp I got 83ºC with VLC and the same movie.
>>>
>>> What temperatures are you guys getting?
>>>
>>> Is this temperature normal for the MBM or is something wrong with my
>>> board?
>>>
>>> Thanks,
>>>
>>> Thiago Vasconcelos
>>>
>>> _______________________________________________
>>> elinux-MinnowBoard mailing list
>>> elinux-MinnowBoard at lists.elinux.org
>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>
>>>
>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20141026/5a7fd334/attachment.html>


More information about the elinux-MinnowBoard mailing list