[MinnowBoard] Trying to update firmware

[Jeremy Hoel]

No problem!  It's an interesting board to play with.  Glad it worked for
you!



On Sun, Oct 26, 2014 at 10:23 PM, Thiago Tenório Jordão de Vasconcelos <
thiagottjv at gmail.com> wrote:

> Jeremy, that worked, thanks!
>
> Atenciosamente,
>
> Thiago Vasconcelos
>
> --
> Programador Web
> Portfolio: http://thiagottjv.com
> Fone:+55-81-96320562
>
> On Sun, Oct 26, 2014 at 4:08 AM, Jeremy Hoel <jthoel at gmail.com> wrote:
>
>> Boot into an interactive shell (F2, boot options, interactive shell) then
>> from there you can FS0: then run the FirmwareUpdate.efi
>>
>> On Sun, Oct 26, 2014 at 7:05 AM, Thiago Tenório Jordão de Vasconcelos <
>> thiagottjv at gmail.com> wrote:
>>
>>> I just have to put both files on a USB driver and run the EFI?
>>> Just that? I was trying to build the whole thing before I gave up. =/
>>>
>>> I'll try that, Jeremy, thanks!
>>> Em 25/10/2014 22:46, "Jeremy Hoel" <jthoel at gmail.com> escreveu:
>>>
>>> Yup.. I found the firmware here:
>>>>
>>>> https://uefidk.com/content/minnowboard-max
>>>>
>>>> Each zip has two bin files, a D02 and R02.. the D02 I assumed was debug
>>>> so I installed the R02.
>>>>
>>>>
>>>> I used the FirmwareUpdate.efi from the minnowboard package that John
>>>> mentioned in Augest
>>>> https://bugzilla.yoctoproject.org/attachment.cgi?id=2087 (that's a 64
>>>> bit version)
>>>>
>>>>
>>>> On Fri, Oct 24, 2014 at 2:32 AM, Thiago Tenório Jordão de Vasconcelos <
>>>> thiagottjv at gmail.com> wrote:
>>>>
>>>>> Jeremy,
>>>>>
>>>>> Did you updated the firmware?
>>>>> How can I do that? I saw on the uefidk.com site but is too
>>>>> complicated (compared with the Original board).
>>>>>
>>>>> Atenciosamente,
>>>>>
>>>>> Thiago Vasconcelos
>>>>>
>>>>> --
>>>>> Programador Web
>>>>> Portfolio: http://thiagottjv.com
>>>>> Fone:+55-81-96320562
>>>>>
>>>>> On Sun, Oct 19, 2014 at 4:14 PM, Jeremy Hoel <jthoel at gmail.com> wrote:
>>>>>
>>>>>> Never mind.. I found my problem.  Minnowboard Max.. not Minnowboard.
>>>>>> All better now.
>>>>>>
>>>>>> On Sun, Oct 19, 2014 at 12:58 PM, Jeremy Hoel <jthoel at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> So, following the instructions from here (1) I grabbed the files for
>>>>>>> both the 1.0 and 0.94 firmware, extracted them to a FAT based UBS stick and
>>>>>>> booted the MM.  When I got to the interactive efi boot, I was able to get
>>>>>>> to the USB drive and when I run the command 'FirmwareUpdate -f MINNOW.fd' I
>>>>>>> get the message "Image type IA32 is not supported by this X64 shell".
>>>>>>>
>>>>>>> Now, there is not other options for the FirewareUpdate or the
>>>>>>> MINNOW.fd files.. there are no other files referencing x64 or X32.
>>>>>>>
>>>>>>>
>>>>>>> Am I missing something?
>>>>>>>
>>>>>>> 1 - http://www.elinux.org/Minnowboard:SPI_Boot_flash
>>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> elinux-MinnowBoard mailing list
>>>>>> elinux-MinnowBoard at lists.elinux.org
>>>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> elinux-MinnowBoard mailing list
>>>>> elinux-MinnowBoard at lists.elinux.org
>>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> elinux-MinnowBoard mailing list
>>>> elinux-MinnowBoard at lists.elinux.org
>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>
>>>>
>>> _______________________________________________
>>> elinux-MinnowBoard mailing list
>>> elinux-MinnowBoard at lists.elinux.org
>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>
>>>
>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20141026/8430a358/attachment.html>