[MinnowBoard] Trying to update firmware
Thiago Tenório Jordão de Vasconcelos
thiagottjv at gmail.com
Mon Oct 27 04:23:54 UTC 2014
Jeremy, that worked, thanks!
Atenciosamente,
Thiago Vasconcelos
--
Programador Web
Portfolio: http://thiagottjv.com
Fone:+55-81-96320562
On Sun, Oct 26, 2014 at 4:08 AM, Jeremy Hoel <jthoel at gmail.com> wrote:
> Boot into an interactive shell (F2, boot options, interactive shell) then
> from there you can FS0: then run the FirmwareUpdate.efi
>
> On Sun, Oct 26, 2014 at 7:05 AM, Thiago Tenório Jordão de Vasconcelos <
> thiagottjv at gmail.com> wrote:
>
>> I just have to put both files on a USB driver and run the EFI?
>> Just that? I was trying to build the whole thing before I gave up. =/
>>
>> I'll try that, Jeremy, thanks!
>> Em 25/10/2014 22:46, "Jeremy Hoel" <jthoel at gmail.com> escreveu:
>>
>> Yup.. I found the firmware here:
>>>
>>> https://uefidk.com/content/minnowboard-max
>>>
>>> Each zip has two bin files, a D02 and R02.. the D02 I assumed was debug
>>> so I installed the R02.
>>>
>>>
>>> I used the FirmwareUpdate.efi from the minnowboard package that John
>>> mentioned in Augest
>>> https://bugzilla.yoctoproject.org/attachment.cgi?id=2087 (that's a 64
>>> bit version)
>>>
>>>
>>> On Fri, Oct 24, 2014 at 2:32 AM, Thiago Tenório Jordão de Vasconcelos <
>>> thiagottjv at gmail.com> wrote:
>>>
>>>> Jeremy,
>>>>
>>>> Did you updated the firmware?
>>>> How can I do that? I saw on the uefidk.com site but is too complicated
>>>> (compared with the Original board).
>>>>
>>>> Atenciosamente,
>>>>
>>>> Thiago Vasconcelos
>>>>
>>>> --
>>>> Programador Web
>>>> Portfolio: http://thiagottjv.com
>>>> Fone:+55-81-96320562
>>>>
>>>> On Sun, Oct 19, 2014 at 4:14 PM, Jeremy Hoel <jthoel at gmail.com> wrote:
>>>>
>>>>> Never mind.. I found my problem. Minnowboard Max.. not Minnowboard.
>>>>> All better now.
>>>>>
>>>>> On Sun, Oct 19, 2014 at 12:58 PM, Jeremy Hoel <jthoel at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> So, following the instructions from here (1) I grabbed the files for
>>>>>> both the 1.0 and 0.94 firmware, extracted them to a FAT based UBS stick and
>>>>>> booted the MM. When I got to the interactive efi boot, I was able to get
>>>>>> to the USB drive and when I run the command 'FirmwareUpdate -f MINNOW.fd' I
>>>>>> get the message "Image type IA32 is not supported by this X64 shell".
>>>>>>
>>>>>> Now, there is not other options for the FirewareUpdate or the
>>>>>> MINNOW.fd files.. there are no other files referencing x64 or X32.
>>>>>>
>>>>>>
>>>>>> Am I missing something?
>>>>>>
>>>>>> 1 - http://www.elinux.org/Minnowboard:SPI_Boot_flash
>>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> elinux-MinnowBoard mailing list
>>>>> elinux-MinnowBoard at lists.elinux.org
>>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> elinux-MinnowBoard mailing list
>>>> elinux-MinnowBoard at lists.elinux.org
>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>
>>>>
>>>
>>> _______________________________________________
>>> elinux-MinnowBoard mailing list
>>> elinux-MinnowBoard at lists.elinux.org
>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>
>>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20141027/cc4cc01a/attachment-0001.html>
More information about the elinux-MinnowBoard
mailing list