[MinnowBoard] Defective Minnowboard?
Rangel, Steven H
shrangel at WPI.EDU
Sun Oct 26 15:44:15 UTC 2014
Hello,
I am directly connected through HDMI, and I'm using a monitor that has worked before. Even when the HDMI cable is not connected and I try accessing it via serial connection the board still doesn't attempt to boot.
On Oct 26, 2014, at 11:34 AM, Thiago Tenório Jordão de Vasconcelos <thiagottjv at gmail.com<mailto:thiagottjv at gmail.com>> wrote:
Hi steven,
Have you tryed changing the monitor?
Are you connecting direct through HDMI or using some sort of adapter?
Thiago Vasconcelos
On Sat, Oct 25, 2014 at 3:29 PM, Rangel, Steven H <shrangel at wpi.edu<mailto:shrangel at wpi.edu>> wrote:
Hello,
My name is Steven and I recently purchased a MinnowBoard MAX. After receiving my minnow board MAX I discovered that it has an issue booting up. There is no video output, both LEDs are lit up, and the only serial output is:
>>>>SecStartup
>>>>MemoryInit Done
At first I thought it was a problem with the firmware so I purchased the DediProg SF100, but even after flashing it with the latest firmware there was no change. Now I am out of ideas on how to fix it. I believe that I have received a defective board. Is there any way I can send it my minnowboard MAX for a replacement? I'm also willing to try any ideas anyone may have on how to fix it. I am currently a college student and I have invested a lot of money into this so any help would be greatly appreciated.
Steven
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
_______________________________________________
elinux-MinnowBoard mailing list
elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>
http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
More information about the elinux-MinnowBoard
mailing list