[MinnowBoard] Trying to update firmware

[Jeremy Hoel]

Boot into an interactive shell (F2, boot options, interactive shell) then
from there you can FS0: then run the FirmwareUpdate.efi

On Sun, Oct 26, 2014 at 7:05 AM, Thiago Tenório Jordão de Vasconcelos <
thiagottjv at gmail.com> wrote:

> I just have to put both files on a USB driver and run the EFI?
> Just that? I was trying to build the whole thing before I gave up. =/
>
> I'll try that, Jeremy, thanks!
> Em 25/10/2014 22:46, "Jeremy Hoel" <jthoel at gmail.com> escreveu:
>
> Yup.. I found the firmware here:
>>
>> https://uefidk.com/content/minnowboard-max
>>
>> Each zip has two bin files, a D02 and R02.. the D02 I assumed was debug
>> so I installed the R02.
>>
>>
>> I used the FirmwareUpdate.efi from the minnowboard package that John
>> mentioned in Augest
>> https://bugzilla.yoctoproject.org/attachment.cgi?id=2087 (that's a 64
>> bit version)
>>
>>
>> On Fri, Oct 24, 2014 at 2:32 AM, Thiago Tenório Jordão de Vasconcelos <
>> thiagottjv at gmail.com> wrote:
>>
>>> Jeremy,
>>>
>>> Did you updated the firmware?
>>> How can I do that? I saw on the uefidk.com site but is too complicated
>>> (compared with the Original board).
>>>
>>> Atenciosamente,
>>>
>>> Thiago Vasconcelos
>>>
>>> --
>>> Programador Web
>>> Portfolio: http://thiagottjv.com
>>> Fone:+55-81-96320562
>>>
>>> On Sun, Oct 19, 2014 at 4:14 PM, Jeremy Hoel <jthoel at gmail.com> wrote:
>>>
>>>> Never mind.. I found my problem.  Minnowboard Max.. not Minnowboard.
>>>> All better now.
>>>>
>>>> On Sun, Oct 19, 2014 at 12:58 PM, Jeremy Hoel <jthoel at gmail.com> wrote:
>>>>
>>>>> So, following the instructions from here (1) I grabbed the files for
>>>>> both the 1.0 and 0.94 firmware, extracted them to a FAT based UBS stick and
>>>>> booted the MM.  When I got to the interactive efi boot, I was able to get
>>>>> to the USB drive and when I run the command 'FirmwareUpdate -f MINNOW.fd' I
>>>>> get the message "Image type IA32 is not supported by this X64 shell".
>>>>>
>>>>> Now, there is not other options for the FirewareUpdate or the
>>>>> MINNOW.fd files.. there are no other files referencing x64 or X32.
>>>>>
>>>>>
>>>>> Am I missing something?
>>>>>
>>>>> 1 - http://www.elinux.org/Minnowboard:SPI_Boot_flash
>>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> elinux-MinnowBoard mailing list
>>>> elinux-MinnowBoard at lists.elinux.org
>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>
>>>>
>>>
>>> _______________________________________________
>>> elinux-MinnowBoard mailing list
>>> elinux-MinnowBoard at lists.elinux.org
>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>
>>>
>>
>> _______________________________________________
>> elinux-MinnowBoard mailing list
>> elinux-MinnowBoard at lists.elinux.org
>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>
>>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20141026/e215b3b1/attachment-0001.html>