[MinnowBoard] Fastboot issue

John 'Warthog9' Hawley warthog19 at eaglescrag.net
Wed Oct 22 04:59:08 UTC 2014


Ahhhh

https://bugzilla.yoctoproject.org/show_bug.cgi?id=6532

and

https://bugzilla.yoctoproject.org/show_bug.cgi?id=6533

Sorry, I had forgotten that network might be one of those factors,
really need to add that to the section about fastboot on the wiki.

- John

On 10/21/2014 09:28 PM, Jeremy Hoel wrote:
> Ha!  I figured it out.  It was trying to do a network boot too.. once I
> removed that I get the shell really easily and from there an exit brings
> me to the bios.
> 
> Thanks!
> 
> On Tue, Oct 21, 2014 at 9:47 PM, Jeremy Hoel <jthoel at gmail.com
> <mailto:jthoel at gmail.com>> wrote:
> 
>     I have nothing in but the USB keyboard. I can give it a while to
>     wait, no problem. I normally just waited like 10 seconds, but I'll
>     let it sit longer.  When i connect via serial I get 
> 
> 
> 
>     >>>>SecStartup
>     >>>>MemoryInit Done
>     >>>>BdsEntry
>     .[2J.[01;01H.[=3h.[2J.[01;01H.[2J.[01;01H.[=3h.[2J.[01;01H.[2J.[01;01H.[=3h.[2J.[01;01H.[2J.[01;01H.[=3h.[2J.[01;01H.[2J.[01;01H.[=3h.[2J.[01;01H.[2J.[01;01H.[=3h.[2J.[01;01H.[0m.[35m.[40m.[2J.[01;01H.[=3h.[2J.[01;01H.[0m.[37m.[40mBoot
>     Failed. EFI USB Device
> 
>     Boot Failed. EFI Hard Drive
> 
> 
> 
>     It boots things fine.. I just wanted to turn off the fastboot to
>     give me more time to test settings and be able to flash bios if need be.
> 
> 
>     On Tue, Oct 21, 2014 at 9:37 PM, John 'Warthog9' Hawley
>     <warthog19 at eaglescrag.net <mailto:warthog19 at eaglescrag.net>> wrote:
> 
>         Assuming you have no storage attached (usb flash drives, sd
>         cards, sata,
>         msata, etc) the system should resort (eventually) to the UEFI
>         shell.  F2
>         is supposed to work as well, do you have an FTDI serial cable to
>         check
>         what's on the serial port?
> 
>         - John
> 
>         On 10/21/2014 08:27 PM, Jeremy Hoel wrote:
>         > Right, I tried that and I still get 'Boot failed' and hitting F2 doesn't
>         > help.
>         >
>         > http://imgur.com/ek8Qqoh
>         >
>         > On Wed, Oct 22, 2014 at 2:19 AM, Timothy Hurita <iviguy at outlook.com <mailto:iviguy at outlook.com>
>         > <mailto:iviguy at outlook.com <mailto:iviguy at outlook.com>>> wrote:
>         >
>         >     To disable fastboot remove the boot media (unplug the hard drive or
>         >     removed the SD card) and boot MBM. This will allow you to get back
>         >     into the BIOS.
>         >
>         >     _______________________________________________
>         >     elinux-MinnowBoard mailing list
>         >     elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>
>         >     <mailto:elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>>
>         >     http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         >
>         >
>         >
>         >
>         > _______________________________________________
>         > elinux-MinnowBoard mailing list
>         > elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>
>         > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         >
> 
>         _______________________________________________
>         elinux-MinnowBoard mailing list
>         elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>
>         http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> 
> 
> 
> 
> 
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> 



More information about the elinux-MinnowBoard mailing list