[MinnowBoard] Trying to update firmware

[Jeremy Hoel]

So, following the instructions from here (1) I grabbed the files for both
the 1.0 and 0.94 firmware, extracted them to a FAT based UBS stick and
booted the MM.  When I got to the interactive efi boot, I was able to get
to the USB drive and when I run the command 'FirmwareUpdate -f MINNOW.fd' I
get the message "Image type IA32 is not supported by this X64 shell".

Now, there is not other options for the FirewareUpdate or the MINNOW.fd
files.. there are no other files referencing x64 or X32.


Am I missing something?

1 - http://www.elinux.org/Minnowboard:SPI_Boot_flash
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20141019/7693ac4a/attachment.html>