[MinnowBoard] MAX - HDMI to VGA connector

[Sam Crawford]

Can't help you with the VGA usage I'm afraid. But I use a mini-HDMI to DVI
adaptor and that works fine for me on multiple computer monitors and a TV.
If you have a DVI port this might be a good option.

Thanks,

Sam


On 13 October 2014 20:38, Thiago Tenório Jordão de Vasconcelos <
thiagottjv at gmail.com> wrote:

> Hi,
>
> I was trying the first boot from the MAX but I can't see anything on my
> monitor.
> I'm using a HDMI to VGA convertor and I think this is the problem.
>
> I have a Raspberry PI here and had the same problem.
> What I had to do is change some of the boot files to force the use of HDMI.
>
> http://youtu.be/Z-zyTpj-s2E?t=9m54s
>
> Raspberry PI aside, is there anything I can do to see something on the
> monitor or I should give up and use a TV with HDMI?
>
> Thiago Vasconcelos
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>


-- 
----
Sam Crawford
SamKnows Limited

Switchboard: +44 (0) 20 3111 4330
DDI: +44 (0) 20 3111 4332

This email is sent for and on behalf of SamKnows Limited.

This email and any attachments are confidential, legally privileged and
protected by copyright. If you are not the intended recipient dissemination
or copying of this email is prohibited. If you have received this in error,
please notify the sender by replying by email and then delete the email
completely from your system.

SamKnows Limited, Registered Number: 06510477, Registered Office: Hill
House, 1 Little New Street, London, EC4A 3TR.  Registered in England and
Wales. Trade Mark 2507103
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20141013/1ab5bd0d/attachment.html>