[MinnowBoard] Populate J2

[Arne Gollin]

Hey,
It was said that the J2 pins are not populated yet. This means that I can't
get power from that pin? How can i populate them?
Am 14.09.2014 14:00 schrieb <elinux-minnowboard-request at lists.elinux.org>:

> Send elinux-MinnowBoard mailing list submissions to
>         elinux-minnowboard at lists.elinux.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> or, via email, send a message with subject or body 'help' to
>         elinux-minnowboard-request at lists.elinux.org
>
> You can reach the person managing the list at
>         elinux-minnowboard-owner at lists.elinux.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of elinux-MinnowBoard digest..."
>
> Today's Topics:
>
>    1. MinnowBoard Max Power Requirements? (David Rolfe)
>
>
> ---------- Weitergeleitete Nachricht ----------
> From: David Rolfe <David at montala.co.uk>
> To: <elinux-minnowboard at lists.elinux.org>
> Cc:
> Date: Sun, 14 Sep 2014 12:00:41 +0100
> Subject: [MinnowBoard] MinnowBoard Max Power Requirements?
> Hi,
>
> I nearly got my Amps and Watts muddled up, as I had previously read on
> www.elinux.org/Minnowboard:MinnowMax#Design_Files that a 2.5 W supply is
> adequate, and it even gives a few examples of suitable models, none of
> which are unfortunately UK specific!
>
> My plan is to us a 4 Amp supply, similar to the one on www.ebay.co.uk/itm/
> 310818455475?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
> which should be sufficient, should it?... even with a 2.5" SSD drive
> connected to the USB 3 port?
>
> If my electrical calculations are correct this equates to a 20 W (4 x 5)
> supply which looks more than OK to me!
>
> Thanks,
>
> David (Rolfe)
>
> -----Original Message----- Date: Sat, 13 Sep 2014 21:06:54 -0700
> From: Nathan Becker <nathanbecker at gmail.com>
> To: MinnowBoard Development and Community Discussion
> <elinux-minnowboard at lists.elinux.org>
> Subject: Re: [MinnowBoard] problem getting Minnowboard Max to start
> Message-ID:
> <CANkqZi7NWxHH5ZJHUwQWe=cCjFb9yQ9ygBY4RTCA_+cwf3qyeQ at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
>  I'm using a 5V 10W power supply. I realize that the spec is 12.5 W, but
>> the
>> wiki points to some other 10W supplies (not the one I have). I guess I'll
>> have to buy another power supply to test further. I tried a 5W supply and
>> found that the blinking is different. At 10W I get both LEDs on for a
>> couple seconds, then the one next to the SATA port blinks off and on very
>> slowly. On a 5W supply, the LED next to the SATA port blinks very
>> rapidly.
>>
>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20140914/1e8aa1fe/attachment.html>