[MinnowBoard] 64-bit vs 32-bit UEFI - What you need to know!

Ferchu R chamac2 at gmail.com
Fri Sep 12 01:25:53 UTC 2014


So I FOLLOWED the procedure to pass from 64 to 32. I think the system
filled 2 lines of dots, when the screen goes black. I waited about a half
hour but there was no sign of new action, so I tried to reboot. Now the
board has not EUFI Shell. But it does have setup, where the third line says
it is MNW2CRB1.86C.0071.R30.1408131324. I was wondering what coused this,
and how I get the board on work again?.

Thanks

2014-09-10 13:04 GMT-05:00 Hawley, John <john.hawley at intel.com>:

> I think there's some value in being explicit or otherwise we'll actually
> cause confusion.  I.E. when you download the firmware and people see
> 32-bit vs. 64-bit firmware in the same place will they always flash the
> right one?  Part of the problem is there is no UI to these firmware
> flashers, they are command line utilities.
>
> - John
>
> On Wed, 2014-09-10 at 13:18 -0400, Adam Goode wrote:
> > I see the zip files already contain both EFI binaries. Assuming the
> > firmware updaters present some firmware selection UI, the
> > simplification I can see here is consolidating by putting both
> > firmware files into the same zip file. You could go further and
> > combine the release and debug versions as well, but that might be
> > unnecessary.
> >
> >
> > Thanks,
> >
> > Adam
> >
> >
> > On Wed, Sep 10, 2014 at 11:45 AM, Darren Hart <dvhart at linux.intel.com>
> wrote:
> > > On 9/10/14, 8:22, "Adam Goode" <adam at spicenitz.org> wrote:
> > >
> > >>Does this mean that both files can just be put into place? If so,
> > >>could you update the distribution to include both and not worry about
> > >>what the current firmware is? It would simplify the process and
> > >>documentation.
> > >
> > > That strikes me as a pretty good suggestion.
> > >
> > > --
> > > Darren
> > >
> > >>
> > >>
> > >>Adam
> > >>
> > >>
> > >>On Wed, Sep 10, 2014 at 11:08 AM, Darren Hart <dvhart at linux.intel.com>
> > >>wrote:
> > >>> On 9/10/14, 1:35, "Roel Jordans" <r.jordans at tue.nl> wrote:
> > >>>
> > >>>>
> > >>>>>
> > >>>>>
> http://www.elinux.org/Minnowboard:MaxBios#Switching_from_64-bit_to_32-b
> > >>>>>it
> > >>>>>
> > >>>>> Basically you have to re-flash the firmware with a 32-bit firmware.
> > >>>>> There's a line in the instructions that may confuse some folks,
> > >>>>> specifically using a FirmwareUpdateX64.efi to flash a 32-bit
> firmware.
> > >>>>> This is because when you go to change the firmware you are running
> a
> > >>>>> 64-bit firmware, and therefore need a 64-bit EFI program to
> actually
> > >>>>>do
> > >>>>> the flashing.
> > >>>>>
> > >>>>> If you want to switch back, you'll do the opposite, use
> > >>>>> FirmwareUpdateIA32.efi to flash a 64-bit firmware.
> > >>>>>
> > >>>>
> > >>>>Maybe it's possible to rename those updates (or add some renamed
> > >>>>updates) to something like FirmwareUpdateIA32to64 or something?  That
> > >>>>would probably remove most of the cause for confusion here.
> > >>>
> > >>> That isn't accurate unfortunately. The update tool doesn't care which
> > >>>bit
> > >>> length you are flashing to, you use the same tool to flash to 32b or
> to
> > >>> 64b, what matters is what firmware you are currently running, and
> that
> > >>>is
> > >>> what the tool name reflects.
> > >>>
> > >>> --
> > >>> Darren Hart                                     Open Source
> Technology
> > >>>Center
> > >>> darren.hart at intel.com                                       Intel
> > >>>Corporation
> > >>>
> > >>>
> > >>>
> > >>> _______________________________________________
> > >>> elinux-MinnowBoard mailing list
> > >>> elinux-MinnowBoard at lists.elinux.org
> > >>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> > >>_______________________________________________
> > >>elinux-MinnowBoard mailing list
> > >>elinux-MinnowBoard at lists.elinux.org
> > >>http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> > >>
> > >
> > >
> > > --
> > > Darren Hart                                     Open Source Technology
> Center
> > > darren.hart at intel.com                                       Intel
> Corporation
> > >
> > >
> > >
> > > _______________________________________________
> > > elinux-MinnowBoard mailing list
> > > elinux-MinnowBoard at lists.elinux.org
> > > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> > _______________________________________________
> > elinux-MinnowBoard mailing list
> > elinux-MinnowBoard at lists.elinux.org
> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20140911/8e7a60bf/attachment-0001.html>


More information about the elinux-MinnowBoard mailing list