[MinnowBoard] Debug display on HDMI display Vs on Hyperterm on Minnow board MAX

[David Anders]

Pavitra,


> On September 9, 2014 at 5:29 AM Pavitra Ramanujam <pramanujam at sunedison.com>
> wrote:
>
>
> While working with Minnow board Max I could get the debug display of EFI
> booting on HDMI. I was not able to display on hyperterm connected to
> Minnowboard via serial debug except for the very first few messages. After
> that all display got diverted to HDMI display.
>
> How to address this issue?
>
> I am trying to boot Debian Squeeze Linux Kernel 2.6.32.
>


you would need to talk to the Debian folks on how they have the serial console
configured....

Dave


> Regards,
> Pavitra
>
> ________________________________
> Confidentiality Statement of SunEdison and its subsidiaries: The contents of
> this message, together with any attachments, are intended only for the use of
> the individual or entity to which they are addressed and may contain
> information that is legally privileged and confidential. If you are not the
> intended recipient, you are hereby notified that any dissemination,
> distribution, or copying of this message, or any attachment, is strictly
> prohibited. If you have received this message in error, please notify the
> original sender immediately by telephone or by return E-mail and delete this
> message, along with any attachments, from your computer.
> No Contract: Regardless of content, this email shall not operate to bind
> SunEdison or its subsidiaries to any purchase order or contract unless
> pursuant to a written agreement signed by SunEdison or its subsidiaries
> expressly permitting the use of email for such purpose.
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard