[MinnowBoard] Getting network adapter into work.
David Anders
danders at circuitco.com
Fri Sep 5 13:27:10 UTC 2014
Ferchu,
looks like you may have gotten a board that doesn't have the MAC programmed.
programming the MAC is part of the automated test process and we've not seen any
other issues with boards going out without MAC addresses. as a work around you
can assign a mac address from linux prior to starting dhcp client.
Dave
> On September 4, 2014 at 7:19 PM Ferchu R <chamac2 at gmail.com> wrote:
>
>
> Hi:
>
> I am having some difficulties in getting the network to work on my
> MinnowMax. When I installed Linux I noticed it did not take IP from DHCP. I
> tried to set it up manually (With Debian Installer), but it was not
> possible either. So I entered to the Bios Setup, and under "Network Device
> List", there is only one item "MAC:00:00:00:00:00:00". Is there something I
> have not taking into account?.
>
> Thanks.
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
More information about the elinux-MinnowBoard
mailing list