[MinnowBoard] Quad Core MinnowBoard Max

[Abhishek]

Hi John,
Thanks for the info, appreciate it, 
I might just get a few PCBs made and populate it with an E3845, I need a bit more processing power for my application, would the existing firmware work?
Cheers,
Abhi

> From: john.hawley at intel.com
> To: elinux-minnowboard at lists.elinux.org
> Date: Thu, 4 Sep 2014 17:33:05 +0000
> Subject: Re: [MinnowBoard] Quad Core MinnowBoard Max
> 
> The SoCs are in fact pin compatible, and there are general plans to do a
> quad core version (probably with 4G of RAM), once we've got the B-step
> version of the MinnowBoard MAXes out the door.  Best guess on time frame
> for that is early next year (considering we are already into September)
> 
> - John
> 
> On Thu, 2014-09-04 at 10:28 -0700, Abhishek wrote:
> > Hello All,
> > 
> > 
> > It is my understanding that the Intel E38XX SoCs are pin compatible,
> > to that effect would it be possible to use an E3845 Quad core version
> > if one were to build a PCB from scratch, any changes I assume might be
> > required in the firmware? and the PSU section to support the added
> > current load?
> > 
> > 
> > Feedback would be much appreciated,
> > 
> > 
> > Regards,
> > 
> > 
> > Abhi
> > _______________________________________________
> > elinux-MinnowBoard mailing list
> > elinux-MinnowBoard at lists.elinux.org
> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> 
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20140904/6508c7ca/attachment.html>