[MinnowBoard] MinnowBoard heatsink to hot to touch

[Hawley, John]

Which version of Angstrom are you using?  Which version of the UEFI code?


-          John

From: elinux-minnowboard-bounces at lists.elinux.org [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of Larry Capps
Sent: Friday, August 22, 2014 10:31 PM
To: elinux-MinnowBoard at lists.elinux.org
Subject: [MinnowBoard] MinnowBoard heatsink to hot to touch

I recently began to work with the original Minnowboard and updated the onboard UEFI code and the Angstrom SD code.  I can boot into the Angstrom desktop but very shortly after that the screen goes blank. If I use the USB serial port, I can log in and look at the directory structure and after a short while the serial port stops responding but the LED's continue to blink. I must wait several minutes before retrying either approach.

Is there something else I should try or is it time for electronic recycling?

Larry Capps
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20140823/c36b2e27/attachment-0001.html>