[MinnowBoard] MinnowBoard heatsink to hot to touch

[Larry Capps]

I recently began to work with the original Minnowboard and updated the onboard UEFI code and the Angstrom SD code.  I can boot into the Angstrom desktop but very shortly after that the screen goes blank. If I use the USB serial port, I can log in and look at the directory structure and after a short while the serial port stops responding but the LED's continue to blink. I must wait several minutes before retrying either approach.


Is there something else I should try or is it time for electronic recycling?

 
Larry Capps
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20140822/1fec2e1f/attachment.html>