[MinnowBoard] Any off-the-shelf cases for minnowmax?

[Hawley, John]

The case I did is up on shapeways, I think there's some issues that shapeways is claiming but with a little cleanup one could be printed / purchased directly from them


-          John

From: elinux-minnowboard-bounces at lists.elinux.org [mailto:elinux-minnowboard-bounces at lists.elinux.org] On Behalf Of David Anders
Sent: Wednesday, August 20, 2014 12:36 PM
To: MinnowBoard Development and Community Discussion
Subject: Re: [MinnowBoard] Any off-the-shelf cases for minnowmax?

Adam,
On 08/20/2014 02:04 PM, Adam Goode wrote:

Hi,

I've seen plenty of 3d printable cases for the Max, but are there any I could buy directly? Anyone planning any?

i fully expect to see some thirdparty cases start to show up soon, however, circuitco isn't planning any stock cases as of yet until we ramp up full production and make sure there are not going to be any changes/fixes that would impact a case design...

Dave



Thanks,

Adam




_______________________________________________

elinux-MinnowBoard mailing list

elinux-MinnowBoard at lists.elinux.org<mailto:elinux-MinnowBoard at lists.elinux.org>

http://lists.elinux.org/mailman/listinfo/elinux-minnowboard

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20140820/f5060bb5/attachment-0001.html>