[MinnowBoard] Important - Firmware Update

[Hawley, John]

Obvious question: are you sure the ftdi serial cable is plugged in the
right way round?  If you've got a dediprog can you read the firmware
back out and compare hash sums between the firmware sent and the
firmware you can read out?  What program are you using to flash the
firmware (flashrom from Linux?).

- John

On Fri, 2014-08-15 at 08:54 +0000, Weggerle, Alexander wrote:
> My board is also not booting since last week and I was waiting for a firmware update to get this fixed. Unfortunately this firmware didn't helped at all. I used a dediprog to flash it. 
> 
> I have no output on serial interface or hdmi anymore. The two blue LEDs are on and with the power button I can toggle the second one. 
> The last thing I did before the board get into this state was pressing ESC during the progress bar was on the screen. The screen got blank and I unplugged the board. 
> 
> Any help is highly appreciated!
> Thanks, Alex
>