[MinnowBoard] Minnowboard max. Couple of questions

[Per Ottosson]

Hi!

I got a couple of questions about the Minnowboard Max:

1) I read these article about a new version 1.91 Ghz and 2 GB ram for $99.
When is this version released?
http://techcrunch.com/2014/04/03/intel-releases-99-minnowboard-max-an-open-source-single-board-computer/

On the webpage i can only see minnowboard max with lower clockrates.

2) Im using it mainly for running processing (processing.org) and arduino (
www.arduino.cc ) I wounder if these two will work? at the moment Im using
Raspberry Pi but since its very slow Im looking for a better solution. I
found this page:
https://github.com/MinnowBoard/processing

Is this for installing processing on Minnowboard or how does it work?

3) Can I run Linux on the board?

4) The problem with the raspbian pi and processing is that Processing
doesnt co-operate with the Pis hardware-accelearation , so anything using
video or 3D will be very slow. Does this work better on Minnowboard Max 1.91

5) How much RAM does it ship with?

Thanks!

Per
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20140519/9b0abc3b/attachment.html>