[MinnowBoard] How to allocate resource for a new pci device in Minnowboard UEFI

[vijaikumar k]

Hi all,
         We have used Minnowboard as a reference for one of our custom
board. We used the Minnowboard uefi for bringing up the board. we have a
pcie to pci bridge connected to pcie1 port of atom and a fpga device which
with a ip core identifies itself as a pci device. pci command shows the bus
no device no etc but it shows that BAR is not allocated. How do I allocate
BAR for this device?

Regards
Vijai Kumar K
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20140507/29f1f363/attachment.html>