[MinnowBoard] [Help] Bob Lure & UART

Darren Hart dvhart at linux.intel.com
Fri Apr 18 07:34:35 UTC 2014


It should be ttyPCH* that you work with. ttyPCH0 is tied to the boot console
(mini usb).
-- 
Darren Hart Open Source Technology Center
darren.hart at intel.com             Intel Corporation

From:  Suresh Ratnam <suresh080891 at gmail.com>
Reply-To:  MinnowBoard Development and Community Discussion
<elinux-minnowboard at lists.elinux.org>
Date:  Thursday, April 17, 2014 at 21:32
To:  MinnowBoard Development and Community Discussion
<elinux-minnowboard at lists.elinux.org>
Subject:  [MinnowBoard] [Help] Bob Lure & UART

> Greetings,
> 
> Has anyone tried working with the minnowboards UART via the Bob Lure? I am
> having no luck accessing the port. Using "setserial -g tty* " i am able to see
> that ttyS[0123] and ttyPCH[0123] are UARTs. I have been fiddling with the
> ttyS0 and S1 via minicom but there is no response.
> 
> Looking at the prints at the back of the lure, it seems that the pins are
> crossed. Does anyone have any troubleshooting tips or confirmation of
> working/non-working lure/uart?
> 
> Thanks!
> _______________________________________________ elinux-MinnowBoard mailing
> list elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20140418/78663d93/attachment.html>


More information about the elinux-MinnowBoard mailing list