[MinnowBoard] [Help] Communicating with an Arduino Based Autopilot (Minnow 1.0 dora RC1 BSP)
Suresh Ratnam
suresh080891 at gmail.com
Thu Apr 10 22:46:48 UTC 2014
Thanks for all the help! I will get on it
On Thu, Apr 10, 2014 at 4:35 PM, Darren Hart <dvhart at linux.intel.com> wrote:
> If you want to build Angstrom, it provides setup scripts. Start at:
> http://www.angstrom-distribution.org/
>
> If you want to just build a Yocto Project test image (like core-image-base
> or core-image-sato) see the README in meta-minnow:
> http://git.yoctoproject.org/cgit/cgit.cgi/meta-minnow/tree/README?h=dora
>
> If you have never built with Yocto before, I suggest the Quick Start guide
> here:
> https://www.yoctoproject.org/docs/current/yocto-project-qs/yocto-project-qs
> .html
>
> --
> Darren Hart Open Source Technology
> Center
> darren.hart at intel.com Intel
> Corporation
>
>
>
> From: Suresh Ratnam <suresh080891 at gmail.com>
> Reply-To: MinnowBoard Development and Community Discussion
> <elinux-minnowboard at lists.elinux.org>
> Date: Thursday, April 10, 2014 at 15:22
> To: MinnowBoard Development and Community Discussion
> <elinux-minnowboard at lists.elinux.org>
> Subject: Re: [MinnowBoard] [Help] Communicating with an Arduino Based
> Autopilot (Minnow 1.0 dora RC1 BSP)
>
>
> >Thanks for the update! I will build it and test it. However, my knowledge
> >is limited. Are there any resources that you recommend?
> >
> >
> >
> >On Thu, Apr 10, 2014 at 3:30 PM, Darren Hart <dvhart at linux.intel.com>
> >wrote:
> >
> >Just FYI. I've updated the dora branch with the new meta-data and updated
> >the kernel to 3.10.35-LTSI. I've pushed and tagged this as
> >1.0-rc1-dora-10.0.1. This is pending final AB builds, but I don't expect
> >any changes between rc1 and 1.0 - unless testing here indicates a need.
> >
> >This includes the CONFIG_USB_ACM module. I'd appreciate a build and test
> >to confirm this resolves the request.
> >
> >On 4/9/14, 22:53, "Koen Kooi" <koen at dominion.thruhere.net> wrote:
> >
> >>Normally the autobuilder will build do a nightly build for 'dora' once
> >>every week, but with the heartbleed issue there will be multiple builds
> >>this week.
> >>
> >>Op 10 apr. 2014, om 01:52 heeft Darren Hart <dvhart at linux.intel.com> het
> >>volgende geschreven:
> >>
> >>> I expect the meta-minnow/dora branch to be ready by Friday if not
> >>>earlier. You'll need a response from Koen on the Angstrom ETA and update
> >>>mechanism. Also depends on which Angstrom image you are running.
> >>>
> >>> You can also build the image yourself using the Angstrom build scripts.
> >>>
> >>> --
> >>> Darren Hart Open Source Technology
> >>>Center
> >>> darren.hart at intel.com Intel
> >>>Corporation
> >>>
> >>> From: Suresh Ratnam <suresh080891 at gmail.com>
> >>> Reply-To: MinnowBoard Development and Community Discussion
> >>><elinux-minnowboard at lists.elinux.org>
> >>> Date: Wednesday, April 9, 2014 at 15:30
> >>> To: MinnowBoard Development and Community Discussion
> >>><elinux-minnowboard at lists.elinux.org>
> >>> Subject: Re: [MinnowBoard] [Help] Communicating with an Arduino Based
> >>>Autopilot
> >>>
> >>>> Thanks! Can I get an ETA for the update so that I can make decisions
> >>>>for this project. The communication between the two is the last piece.
> >>>> Also, how would the update be applied? Is it through opkg upgrade or
> >>>>do I need to update the kernel?
> >>>> Once again, I appreciate the help
> >>>> On Apr 9, 2014 2:34 PM, "Darren Hart" <dvhart at linux.intel.com> wrote:
> >>>>> I verified that it was missing from the BSP and I have submitted the
> >>>>>meta
> >>>>> data to add it to the linux-yocto repository. Once that merges, I'll
> >>>>> update the meta-minnow/dora branch to include it. At that point, I'll
> >>>>> likely tag and release minnow/dora and request Koen kick off new
> >>>>>Angstrom
> >>>>> builds for dora.
> >>>>>
> >>>>> --
> >>>>> Darren
> >>>>>
> >>>>> On 4/9/14, 11:26, "selsinork at gmail.com" <selsinork at gmail.com> wrote:
> >>>>>
> >>>>> >No, it has nothing to do with opkg. CONFIG_USB_ACM is the kernel
> >>>>>config
> >>>>> >option that's required to have the cdc-acm driver built.
> >>>>> >
> >>>>> >Darren can add it in the BSP to make the module available.
> >>>>> >
> >>>>> >On 09/04/14 18:45, Suresh Ratnam wrote:
> >>>>> >> Thanks selsinor. I read up on that and try it later today.
> >>>>> >> Is it through opkg or are the specific steps?
> >>>>> >>
> >>>>> >> On Apr 9, 2014 11:12 AM, <selsinork at gmail.com> wrote:
> >>>>> >>
> >>>>> >>> CONFIG_USB_ACM will enable it, but really you probably want to
> >>>>>enable
> >>>>> >>>as
> >>>>> >>> modules drivers for every usb device you can.
> >>>>> >>>
> >>>>> >>>
> >>>>> >>> On 09/04/14 17:16, Darren Hart wrote:
> >>>>> >>>> This is very likely due to that particular driver not being
> >>>>>included
> >>>>> >>>>by
> >>>>> >>> the
> >>>>> >>>> BSP. You can verify by determining the specific CONFIG required
> >>>>>and
> >>>>> >>>> verifying it is or is not in your kernel config
> >>>>>(/proc/config.gz). If
> >>>>> >>>>it
> >>>>> >>> is,
> >>>>> >>>> you can verify in the driver source fi the vendor/product ID is
> >>>>> >>> supported by
> >>>>> >>>> the driver.
> >>>>> >>>>
> >>>>> >>>> I suspect you just need to build the driver. If you find the
> >>>>>CONFIG is
> >>>>> >>>> missing, just let me know what it is you want added and I'll
> >>>>>update
> >>>>> >>>>the
> >>>>> >>> BSP.
> >>>>> >>>> In the mean time, you can install the kernel dev packages and
> >>>>>build it
> >>>>> >>>> yourself.
> >>>>> >>>>
> >>>>> >>>> We have 3.10-LTSI support in the dora branch of the minnow BSP
> >>>>>layer
> >>>>> >>>> currently. I was about to tag it and release it, but let's make
> >>>>>sure
> >>>>> >>>>it
> >>>>> >>> has
> >>>>> >>>> the support you need first. If not, I'll add it first.
> >>>>> >>>>
> >>>>> >>>>
> >>>>> >>>>
> >>>>> >>>> _______________________________________________
> >>>>> >>>> elinux-MinnowBoard mailing list
> >>>>> >>>> elinux-MinnowBoard at lists.elinux.org
> >>>>> >>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >>>>> >>>>
> >>>>> >>>
> >>>>> >>> _______________________________________________
> >>>>> >>> elinux-MinnowBoard mailing list
> >>>>> >>> elinux-MinnowBoard at lists.elinux.org
> >>>>> >>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >>>>> >>>
> >>>>> >>
> >>>>> >>
> >>>>> >>
> >>>>> >> _______________________________________________
> >>>>> >> elinux-MinnowBoard mailing list
> >>>>> >> elinux-MinnowBoard at lists.elinux.org
> >>>>> >> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >>>>> >>
> >>>>> >
> >>>>> >_______________________________________________
> >>>>> >elinux-MinnowBoard mailing list
> >>>>> >elinux-MinnowBoard at lists.elinux.org
> >>>>> >http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >>>>> >
> >>>>>
> >>>>>
> >>>>> --
> >>>>> Darren Hart Open Source
> >>>>>Technology Center
> >>>>> darren.hart at intel.com Intel
> >>>>>Corporation
> >>>>>
> >>>>>
> >>>>>
> >>>>> _______________________________________________
> >>>>> elinux-MinnowBoard mailing list
> >>>>> elinux-MinnowBoard at lists.elinux.org
> >>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >>>> _______________________________________________ elinux-MinnowBoard
> >>>>mailing list elinux-MinnowBoard at lists.elinux.org
> >>>>http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >>
> >>
> >
> >
> >--
> >Darren Hart Open Source Technology
> >Center
> >darren.hart at intel.com Intel
> >Corporation
> >
> >
> >
> >_______________________________________________
> >elinux-MinnowBoard mailing list
> >elinux-MinnowBoard at lists.elinux.org
> >http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >
> >
> >
> >
> >
> >_______________________________________________
> >elinux-MinnowBoard mailing list
> >elinux-MinnowBoard at lists.elinux.orghttp://
> lists.elinux.org/mailman/listinf
> >o/elinux-minnowboard
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20140410/a4085f3a/attachment.html>
More information about the elinux-MinnowBoard
mailing list