[MinnowBoard] [Help] Communicating with an Arduino Based Autopilot

Suresh Ratnam suresh080891 at gmail.com
Wed Apr 9 17:45:40 UTC 2014


Thanks selsinor. I read up on that and try it later today.
Is it through opkg or are the specific steps?
On Apr 9, 2014 11:12 AM, <selsinork at gmail.com> wrote:

> CONFIG_USB_ACM will enable it, but really you probably want to enable as
> modules drivers for every usb device you can.
>
>
> On 09/04/14 17:16, Darren Hart wrote:
> > This is very likely due to that particular driver not being included by
> the
> > BSP. You can verify by determining the specific CONFIG required and
> > verifying it is or is not in your kernel config (/proc/config.gz). If it
> is,
> > you can verify in the driver source fi the vendor/product ID is
> supported by
> > the driver.
> >
> > I suspect you just need to build the driver. If you find the CONFIG is
> > missing, just let me know what it is you want added and I'll update the
> BSP.
> > In the mean time, you can install the kernel dev packages and build it
> > yourself.
> >
> > We have 3.10-LTSI support in the dora branch of the minnow BSP layer
> > currently. I was about to tag it and release it, but let's make sure it
> has
> > the support you need first. If not, I'll add it first.
> >
> >
> >
> > _______________________________________________
> > elinux-MinnowBoard mailing list
> > elinux-MinnowBoard at lists.elinux.org
> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> >
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20140409/b7ad495d/attachment.html>


More information about the elinux-MinnowBoard mailing list