[MinnowBoard] Repeating "pch_gbe: Transfer Carrier Sense Error" message

[Robert]

Yes!  It was the Ethernet connection.  Thanks.

I tried replacing the cable, but that didn't do it.  Then I moved the
connection directly to my router instead of thru a hub.  That did it.

The problem comes back when I go back to the hub.  So I will just leave it
connected to the router.

Thanks for your help.

Robert

========================================

  Booting `boot'

[    0.779148] ivtvfb:  no cards found
[    0.942169] EXT3-fs (mmcblk0p2): error: couldn't mount because of
unsupported optional features (240)
[    0.954193] EXT2-fs (mmcblk0p2): error: couldn't mount because of
unsupported optional features (244)
[   13.258673] pch_can 0000:02:0c.3 (unregistered net_device): PCH CAN
opened with MSI

.---O---.                                           
|       |                  .-.           o o        
|   |   |-----.-----.-----.| |   .----..-----.-----.
|       |     | __  |  ---'| '--.|  .-'|     |     |
|   |   |  |  |     |---  ||  --'|  |  |  '  | | | |
'---'---'--'--'--.  |-----''----''--'  '-----'-'-'-'
                -'  |
                '---'

The Angstrom Distribution minnow ttyPCH0

Angstrom v2012.12 - Kernel 3.8.13-yocto-standard

minnow login: root
Last login: Mon Jan  1 00:00:40 UTC 2001 on ttyPCH0
root at minnow:~#

===========================================

-----Original Message-----
From: Ken Tait [mailto:ktait at venturesystemdesign.com] 
Sent: Tuesday, March 25, 2014 8:16 AM
To: robert at layer2.com
Subject: Re: [MinnowBoard] Repeating "pch_gbe: Transfer Carrier Sense Error"
message

Robert,

not sure where this comes from, but if I had to guess it's the wifi driver.
Try plugging in a wifi stick and see if it disappears..

Carrier sense message could only apply to an ethernet connection, either
wired or wireless. Do you have a network hooked up and if so what is it's
configuration?

Ken