<div dir="ltr"><div><div><div>David,<br><br></div>Don't do that unless your drive get less than 0.5A and/or your powered hub allow more than 500ma draw.<br></div>Don't forget that every USB out is rated 500ma.<br><br></div>I did that using a cellphone charger rated 2A for my drive. xD<br><div class="gmail_extra"><div><div class="gmail_signature"><br>Thiago Vasconcelos<br>
<br>
</div></div>
<br><div class="gmail_quote">On Fri, Nov 7, 2014 at 11:04 AM, Arne Gollin <span dir="ltr"><<a href="mailto:arne.gollin@googlemail.com" target="_blank">arne.gollin@googlemail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><p dir="ltr">THX i will double check.</p>
<div class="gmail_quote">Am 07.11.2014 15:02 schrieb "Thiago Tenório Jordão de Vasconcelos" <<a href="mailto:thiagottjv@gmail.com" target="_blank">thiagottjv@gmail.com</a>>:<div><div class="h5"><br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr"><div>Arne, did you checked the polarity of the J2?<br><br></div>On the docs say that pin 1 is ground and pin 2 is 5V. But in my board is inverted. The pin 2 is ground and pin 1 is 5V.<br><div class="gmail_extra"><br clear="all"><div><div>Thiago Vasconcelos<br>
<br></div></div><div class="gmail_quote">On Fri, Nov 7, 2014 at 10:55 AM, "Thomas B. Rücker" <span dir="ltr"><<a href="mailto:thomas@ruecker.fi" target="_blank">thomas@ruecker.fi</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi,<br>
<span><br>
On 11/07/2014 01:51 PM, Arne Gollin wrote:<br>
><br>
> Hey, i wanted to power a SSD using the j2 Pins which provide 5v<br>
> usually for a fan. I bought a SSD which at max uses 0.5 watts... So<br>
> this should be fine since the Pins provide 1 A. But when i plug in the<br>
> SSD and start the board is always shortcuts. I tried to use the j5 or<br>
> j6 the one with 5v, and this would work when it would provide more amper.<br>
> So what is wrong with the j2 Pins? I tested my cable but this seems to<br>
> be OK.<br>
><br>
<br>
</span>What is the rating of the power supply, that you are using for your MAX?<br>
The drive might have a significant initial draw and that combined with<br>
the CPU might just overload your power supply.<br>
<br>
<br>
Cheers<br>
<span><font color="#888888"><br>
Thomas<br>
</font></span><div><div>_______________________________________________<br>
elinux-MinnowBoard mailing list<br>
<a href="mailto:elinux-MinnowBoard@lists.elinux.org" target="_blank">elinux-MinnowBoard@lists.elinux.org</a><br>
<a href="http://lists.elinux.org/mailman/listinfo/elinux-minnowboard" target="_blank">http://lists.elinux.org/mailman/listinfo/elinux-minnowboard</a><br>
</div></div></blockquote></div><br></div></div>
</blockquote></div></div></div>
</blockquote></div><br></div></div>