[MinnowBoard] SD card booting issue in MinnowBoard Turbot Quad-Core

[Asharaf Perinchikkal]

Hi All,

This is regarding SD card booting issue in MinnowBoard Turbot Quad-Core, Dual Ethernet board.

We have installed Ubuntu 16.04 from USB drive to SD card as per steps in the link https://minnowboard.org/tutorials/installing-ubuntu-16.04-on-minnowboardmax/after-the-automated-installation-completes.But we are not possible to boot from SD card. It seems SD card is not detected.

When we tried to accesses sd card using command
    fs0: It shows an error "FS0 is not a valid mapping"

Expecting your support to resolve the sdcard booting issue.

Regards
Asharaf P
---Disclaimer------------------------------ This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Opinions, conclusions and other information in this transmission that do not relate to the official business of QuEST Global and/or its subsidiaries, shall be understood as neither given nor endorsed by it. Any statements made herein that are tantamount to contractual obligations, promises, claims or commitments shall not be binding on the Company unless followed by written confirmation by an authorized signatory of the Company. -----------------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20170719/ee1a8310/attachment.html>