[MinnowBoard] Minnownoard max design with Gerber fils and install it

John Hawley john.hawley at intel.com
Tue Nov 8 00:19:23 UTC 2016


Ok that looks like it's the E3825, so that looks like it should
alleviate that as an issue (wanted to make sure that it was a compatible
part, just on the off chance it wasn't)

Memory part, at first glance anyway, looks right.  I'd have to go do a
lot more digging to be 100% sure there.

Storage processor vs. mobile processor is a little odd, I'd need some
more context on what you are referring to.  The chips are are using are
based on the Baytrail-I skus, or the industrial version of the skus.
There are some other Baytrail skus, but most of them are not footprint
compatible with the Baytrail-I (can't remember which one off hand).
Pretty sure, given the part number you last gave, you've got the right SoC.

Have you tried flashing the debug firmware in and seeing if anything
comes out of the serial port?

Unless something is horribly shorted, you are getting both LEDs so the
SoC should be online, but you are clearly just not getting past
something in the early start-up, and it's hard to tell, or even guess,
without something further.

So here's my suggested next steps:
- If you can flash the debug firmware on the board, and see if you get
anything out of the serial port (J4)

- If you don't get anything out of the serial port with the debug
firmware the only other step I can reasonably think of is to go and snag
a full IDP/XDP (plus the debug lure) and start debugging it that way,
but this is not an inexpensive way to go, so I would start with trying
the debug firmware, and let me see what else I can find in the mean time.

- John 'Warthog9' Hawley

On 11/06/2016 10:08 PM, zahra rahimkhani wrote:
> Dear john 
> 
> Part number soc is FH8065301567313 SR1X9
> can you suggest a solve?
> 
> Thank you 
> 
> On Sun, Nov 6, 2016 at 2:08 PM, zahra rahimkhani
> <zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.com>> wrote:
> 
>     john
> 
>     why it is very important about part number soc ?
> 
>     i bought it from a sale, she is free today ,i send information it
>     tomorrow. 
> 
>     Thank you 
> 
>     On Sun, Nov 6, 2016 at 11:00 AM, John 'Warthog9' Hawley
>     <warthog9 at eaglescrag.net <mailto:warthog9 at eaglescrag.net>> wrote:
> 
>         Firmware is from that location, just snag the debug version and
>         flash that.
> 
>         As for the link, I need where you bought the SoC itself from, as the
>         numbers you've provided don't match anything I can track down.
> 
>         - John 'Warthog9' Hawley
> 
>         On 11/06/2016 12:14 AM, zahra rahimkhani wrote:
>         > john
>         > can you check link?
>         > and firmware ?
>         >
>         > Thank you
>         >
>         > On Sun, Nov 6, 2016 at 10:16 AM, zahra rahimkhani
>         > <zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.com>
>         <mailto:zrahimkhani2014 at gmail.com
>         <mailto:zrahimkhani2014 at gmail.com>>> wrote:
>         >
>         >     i used this link , it have Gerber files for v2
>         >
>         >     http://wiki.minnowboard.org/MinnowBoard_MAX
>         <http://wiki.minnowboard.org/MinnowBoard_MAX>
>         >     <http://wiki.minnowboard.org/MinnowBoard_MAX
>         <http://wiki.minnowboard.org/MinnowBoard_MAX>>
>         >
>         >     Also , I used this link for firmware
>         >
>         >     https://firmware.intel.com/projects/minnowboard-max
>         <https://firmware.intel.com/projects/minnowboard-max>
>         >     <https://firmware.intel.com/projects/minnowboard-max
>         <https://firmware.intel.com/projects/minnowboard-max>>
>         >
>         >     Thank you
>         >
>         >
>         >
>         >     On Sun, Nov 6, 2016 at 10:08 AM, John 'Warthog9' Hawley
>         >     <warthog9 at eaglescrag.net <mailto:warthog9 at eaglescrag.net>
>         <mailto:warthog9 at eaglescrag.net
>         <mailto:warthog9 at eaglescrag.net>>> wrote:
>         >
>         >         Can you give me a link to the Baytrail you used, the number you list
>         >         doesn't come up on anything useful.
>         >
>         >         As for debug firmware you'll need to flash it in just as you did
>         >         with
>         >         the stock firmware, you can snag it from the same place you
>         >         snagged the
>         >         default firmware (which is up on the Intel firmware site)
>         >
>         >         - John
>         >
>         >         On 11/05/2016 11:33 PM, zahra rahimkhani wrote:
>         >         > I want to check clock for Ram and spi flash ?
>         >         >
>         >         > do you agree or disagree ?
>         >         >
>         >         > Thank you so much
>         >         >
>         >         > On Thu, Nov 3, 2016 at 11:26 AM, zahra rahimkhani
>         >         > <zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.com>
>         <mailto:zrahimkhani2014 at gmail.com
>         <mailto:zrahimkhani2014 at gmail.com>>
>         >         <mailto:zrahimkhani2014 at gmail.com
>         <mailto:zrahimkhani2014 at gmail.com>
>         >         <mailto:zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.com>>>>
>         wrote:
>         >         >
>         >         >     -I use the Max Gerber files
>         >         >     -The both of Leds are on but them have not delay when they are
>         >         >     turning on .
>         >         >     -It was got with BJA device.
>         >         >     _I used BAYTRAIL-IFH8065301567311.
>         >         >     -Nothing do not come on serial port
>         >         >     -I do not know  how debug frimwear .
>         >         >     -I can not sure about BGA components How check them ?
>         >         >
>         >         >     On 03/11/2016 10:49 AM, "John 'Warthog9' Hawley"
>         >         >     <warthog9 at eaglescrag.net <mailto:warthog9 at eaglescrag.net>
>         <mailto:warthog9 at eaglescrag.net <mailto:warthog9 at eaglescrag.net>>
>         >         <mailto:warthog9 at eaglescrag.net
>         <mailto:warthog9 at eaglescrag.net>
>         >         <mailto:warthog9 at eaglescrag.net
>         <mailto:warthog9 at eaglescrag.net>>>> wrote:
>         >         >
>         >         >         - Did you use the MAX or the Turbot Gerber
>         files?
>         >         >         - Do either of the LEDs (D1, D2) come on
>         when power is applied?
>         >         >         - Did you get the SoC itself placed correctly?
>         >         >         - Which SoC are you using?
>         >         >         - Which RAM chips are you using?
>         >         >         - Does anything come out on the serial port
>         during boot?
>         >         >         - Have you tried with the debug firmware?
>         >         >         - Are you sure there isn't a short on the
>         pcb itself?
>         >         >
>         >         >         If you can answer that it should get us a
>         good starting point on
>         >         >         trying to help you with what you are seeing.
>         >         >
>         >         >         - John 'Warthog9' Hawley
>         >         >
>         >         >         On 11/3/2016 12:01 AM, zahra rahimkhani wrote:
>         >         >
>         >         >             Hello
>         >         >             I make  a minnowboard  max with use from
>         GERBER files on its
>         >         >             website .
>         >         >
>         >         >             but it do not work . i tested all of
>         voltages . they are
>         >         >             correct .
>         >         >             also freamwear was programmed by a
>         programmer on chip 1.8 v
>         >         >
>         >         >             but it is not work . please suggest a solve?
>         >         >
>         >         >             thank you
>         >         >
>         >         >
>         >         >           
>          _______________________________________________
>         >         >             elinux-MinnowBoard mailing list
>         >         >             elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>
>         >         <mailto:elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>>
>         >         >           
>          <mailto:elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>
>         >         <mailto:elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>>>
>         >         >
>         >          http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>         >         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>>
>         >         >             <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>         >         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>>>
>         >         >
>         >         >         _______________________________________________
>         >         >         elinux-MinnowBoard mailing list
>         >         >         elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>
>         >         <mailto:elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>>
>         >         >         <mailto:elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>
>         >         <mailto:elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>>>
>         >         >
>         >         
>         http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>         >       
>          <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>>
>         >         >
>         >         
>         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>         >       
>          <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>>>
>         >         >
>         >         >
>         >         >
>         >         >
>         >         > _______________________________________________
>         >         > elinux-MinnowBoard mailing list
>         >         > elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>
>         >         <mailto:elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>>
>         >         >
>         http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>         >       
>          <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>>
>         >         >
>         >
>         >         _______________________________________________
>         >         elinux-MinnowBoard mailing list
>         >         elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>
>         >         <mailto:elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>>
>         >       
>          http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>         >       
>          <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>>
>         >
>         >
>         >
>         >
>         >
>         > _______________________________________________
>         > elinux-MinnowBoard mailing list
>         > elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>
>         > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>         >
> 
>         _______________________________________________
>         elinux-MinnowBoard mailing list
>         elinux-MinnowBoard at lists.elinux.org
>         <mailto:elinux-MinnowBoard at lists.elinux.org>
>         http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
> 
> 
> 
> 
> 
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
> 


More information about the elinux-MinnowBoard mailing list