[MinnowBoard] Minnownoard max design with Gerber fils and install it

zahra rahimkhani zrahimkhani2014 at gmail.com
Mon Nov 7 08:51:36 UTC 2016


john

probably, my processor is a storage processor.
what is difference between storage processor  and mobile processor  ?


On Mon, Nov 7, 2016 at 10:06 AM, zahra rahimkhani <zrahimkhani2014 at gmail.com
> wrote:

> and part number Ram is :
> MT41K256M16HA-125:E
>
> Thank you
>
> On Mon, Nov 7, 2016 at 9:38 AM, zahra rahimkhani <
> zrahimkhani2014 at gmail.com> wrote:
>
>> Dear john
>>
>> Part number soc is FH8065301567313 SR1X9
>> can you suggest a solve?
>>
>> Thank you
>>
>> On Sun, Nov 6, 2016 at 2:08 PM, zahra rahimkhani <
>> zrahimkhani2014 at gmail.com> wrote:
>>
>>> john
>>>
>>> why it is very important about part number soc ?
>>>
>>> i bought it from a sale, she is free today ,i send information it
>>> tomorrow.
>>>
>>> Thank you
>>>
>>> On Sun, Nov 6, 2016 at 11:00 AM, John 'Warthog9' Hawley <
>>> warthog9 at eaglescrag.net> wrote:
>>>
>>>> Firmware is from that location, just snag the debug version and flash
>>>> that.
>>>>
>>>> As for the link, I need where you bought the SoC itself from, as the
>>>> numbers you've provided don't match anything I can track down.
>>>>
>>>> - John 'Warthog9' Hawley
>>>>
>>>> On 11/06/2016 12:14 AM, zahra rahimkhani wrote:
>>>> > john
>>>> > can you check link?
>>>> > and firmware ?
>>>> >
>>>> > Thank you
>>>> >
>>>> > On Sun, Nov 6, 2016 at 10:16 AM, zahra rahimkhani
>>>> > <zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.com>> wrote:
>>>> >
>>>> >     i used this link , it have Gerber files for v2
>>>> >
>>>> >     http://wiki.minnowboard.org/MinnowBoard_MAX
>>>> >     <http://wiki.minnowboard.org/MinnowBoard_MAX>
>>>> >
>>>> >     Also , I used this link for firmware
>>>> >
>>>> >     https://firmware.intel.com/projects/minnowboard-max
>>>> >     <https://firmware.intel.com/projects/minnowboard-max>
>>>> >
>>>> >     Thank you
>>>> >
>>>> >
>>>> >
>>>> >     On Sun, Nov 6, 2016 at 10:08 AM, John 'Warthog9' Hawley
>>>> >     <warthog9 at eaglescrag.net <mailto:warthog9 at eaglescrag.net>> wrote:
>>>> >
>>>> >         Can you give me a link to the Baytrail you used, the number
>>>> you list
>>>> >         doesn't come up on anything useful.
>>>> >
>>>> >         As for debug firmware you'll need to flash it in just as you
>>>> did
>>>> >         with
>>>> >         the stock firmware, you can snag it from the same place you
>>>> >         snagged the
>>>> >         default firmware (which is up on the Intel firmware site)
>>>> >
>>>> >         - John
>>>> >
>>>> >         On 11/05/2016 11:33 PM, zahra rahimkhani wrote:
>>>> >         > I want to check clock for Ram and spi flash ?
>>>> >         >
>>>> >         > do you agree or disagree ?
>>>> >         >
>>>> >         > Thank you so much
>>>> >         >
>>>> >         > On Thu, Nov 3, 2016 at 11:26 AM, zahra rahimkhani
>>>> >         > <zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.
>>>> com>
>>>> >         <mailto:zrahimkhani2014 at gmail.com
>>>> >         <mailto:zrahimkhani2014 at gmail.com>>> wrote:
>>>> >         >
>>>> >         >     -I use the Max Gerber files
>>>> >         >     -The both of Leds are on but them have not delay when
>>>> they are
>>>> >         >     turning on .
>>>> >         >     -It was got with BJA device.
>>>> >         >     _I used BAYTRAIL-IFH8065301567311.
>>>> >         >     -Nothing do not come on serial port
>>>> >         >     -I do not know  how debug frimwear .
>>>> >         >     -I can not sure about BGA components How check them ?
>>>> >         >
>>>> >         >     On 03/11/2016 10:49 AM, "John 'Warthog9' Hawley"
>>>> >         >     <warthog9 at eaglescrag.net <mailto:warthog9 at eaglescrag.ne
>>>> t>
>>>> >         <mailto:warthog9 at eaglescrag.net
>>>> >         <mailto:warthog9 at eaglescrag.net>>> wrote:
>>>> >         >
>>>> >         >         - Did you use the MAX or the Turbot Gerber files?
>>>> >         >         - Do either of the LEDs (D1, D2) come on when power
>>>> is applied?
>>>> >         >         - Did you get the SoC itself placed correctly?
>>>> >         >         - Which SoC are you using?
>>>> >         >         - Which RAM chips are you using?
>>>> >         >         - Does anything come out on the serial port during
>>>> boot?
>>>> >         >         - Have you tried with the debug firmware?
>>>> >         >         - Are you sure there isn't a short on the pcb
>>>> itself?
>>>> >         >
>>>> >         >         If you can answer that it should get us a good
>>>> starting point on
>>>> >         >         trying to help you with what you are seeing.
>>>> >         >
>>>> >         >         - John 'Warthog9' Hawley
>>>> >         >
>>>> >         >         On 11/3/2016 12:01 AM, zahra rahimkhani wrote:
>>>> >         >
>>>> >         >             Hello
>>>> >         >             I make  a minnowboard  max with use from GERBER
>>>> files on its
>>>> >         >             website .
>>>> >         >
>>>> >         >             but it do not work . i tested all of voltages .
>>>> they are
>>>> >         >             correct .
>>>> >         >             also freamwear was programmed by a programmer
>>>> on chip 1.8 v
>>>> >         >
>>>> >         >             but it is not work . please suggest a solve?
>>>> >         >
>>>> >         >             thank you
>>>> >         >
>>>> >         >
>>>> >         >             _______________________________________________
>>>> >         >             elinux-MinnowBoard mailing list
>>>> >         >             elinux-MinnowBoard at lists.elinux.org
>>>> >         <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>> >         >             <mailto:elinux-MinnowBoard at lists.elinux.org
>>>> >         <mailto:elinux-MinnowBoard at lists.elinux.org>>
>>>> >         >
>>>> >          http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>> >         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>>>> >         >             <http://lists.elinux.org/mail
>>>> man/listinfo/elinux-minnowboard
>>>> >         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>> >>
>>>> >         >
>>>> >         >         _______________________________________________
>>>> >         >         elinux-MinnowBoard mailing list
>>>> >         >         elinux-MinnowBoard at lists.elinux.org
>>>> >         <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>> >         >         <mailto:elinux-MinnowBoard at lists.elinux.org
>>>> >         <mailto:elinux-MinnowBoard at lists.elinux.org>>
>>>> >         >
>>>> >          http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>> >         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>>>> >         >
>>>> >          <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>> >         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>> >>
>>>> >         >
>>>> >         >
>>>> >         >
>>>> >         >
>>>> >         > _______________________________________________
>>>> >         > elinux-MinnowBoard mailing list
>>>> >         > elinux-MinnowBoard at lists.elinux.org
>>>> >         <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>> >         > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>> >         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>>>> >         >
>>>> >
>>>> >         _______________________________________________
>>>> >         elinux-MinnowBoard mailing list
>>>> >         elinux-MinnowBoard at lists.elinux.org
>>>> >         <mailto:elinux-MinnowBoard at lists.elinux.org>
>>>> >         http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>> >         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>>>> >
>>>> >
>>>> >
>>>> >
>>>> >
>>>> > _______________________________________________
>>>> > elinux-MinnowBoard mailing list
>>>> > elinux-MinnowBoard at lists.elinux.org
>>>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>> >
>>>>
>>>> _______________________________________________
>>>> elinux-MinnowBoard mailing list
>>>> elinux-MinnowBoard at lists.elinux.org
>>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20161107/9818d2a6/attachment-0001.html>


More information about the elinux-MinnowBoard mailing list