[MinnowBoard] Minnownoard max design with Gerber fils and install it

zahra rahimkhani zrahimkhani2014 at gmail.com
Mon Nov 7 06:36:05 UTC 2016


and part number Ram is :
MT41K256M16HA-125:E

Thank you

On Mon, Nov 7, 2016 at 9:38 AM, zahra rahimkhani <zrahimkhani2014 at gmail.com>
wrote:

> Dear john
>
> Part number soc is FH8065301567313 SR1X9
> can you suggest a solve?
>
> Thank you
>
> On Sun, Nov 6, 2016 at 2:08 PM, zahra rahimkhani <
> zrahimkhani2014 at gmail.com> wrote:
>
>> john
>>
>> why it is very important about part number soc ?
>>
>> i bought it from a sale, she is free today ,i send information it
>> tomorrow.
>>
>> Thank you
>>
>> On Sun, Nov 6, 2016 at 11:00 AM, John 'Warthog9' Hawley <
>> warthog9 at eaglescrag.net> wrote:
>>
>>> Firmware is from that location, just snag the debug version and flash
>>> that.
>>>
>>> As for the link, I need where you bought the SoC itself from, as the
>>> numbers you've provided don't match anything I can track down.
>>>
>>> - John 'Warthog9' Hawley
>>>
>>> On 11/06/2016 12:14 AM, zahra rahimkhani wrote:
>>> > john
>>> > can you check link?
>>> > and firmware ?
>>> >
>>> > Thank you
>>> >
>>> > On Sun, Nov 6, 2016 at 10:16 AM, zahra rahimkhani
>>> > <zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.com>> wrote:
>>> >
>>> >     i used this link , it have Gerber files for v2
>>> >
>>> >     http://wiki.minnowboard.org/MinnowBoard_MAX
>>> >     <http://wiki.minnowboard.org/MinnowBoard_MAX>
>>> >
>>> >     Also , I used this link for firmware
>>> >
>>> >     https://firmware.intel.com/projects/minnowboard-max
>>> >     <https://firmware.intel.com/projects/minnowboard-max>
>>> >
>>> >     Thank you
>>> >
>>> >
>>> >
>>> >     On Sun, Nov 6, 2016 at 10:08 AM, John 'Warthog9' Hawley
>>> >     <warthog9 at eaglescrag.net <mailto:warthog9 at eaglescrag.net>> wrote:
>>> >
>>> >         Can you give me a link to the Baytrail you used, the number
>>> you list
>>> >         doesn't come up on anything useful.
>>> >
>>> >         As for debug firmware you'll need to flash it in just as you
>>> did
>>> >         with
>>> >         the stock firmware, you can snag it from the same place you
>>> >         snagged the
>>> >         default firmware (which is up on the Intel firmware site)
>>> >
>>> >         - John
>>> >
>>> >         On 11/05/2016 11:33 PM, zahra rahimkhani wrote:
>>> >         > I want to check clock for Ram and spi flash ?
>>> >         >
>>> >         > do you agree or disagree ?
>>> >         >
>>> >         > Thank you so much
>>> >         >
>>> >         > On Thu, Nov 3, 2016 at 11:26 AM, zahra rahimkhani
>>> >         > <zrahimkhani2014 at gmail.com <mailto:zrahimkhani2014 at gmail.com
>>> >
>>> >         <mailto:zrahimkhani2014 at gmail.com
>>> >         <mailto:zrahimkhani2014 at gmail.com>>> wrote:
>>> >         >
>>> >         >     -I use the Max Gerber files
>>> >         >     -The both of Leds are on but them have not delay when
>>> they are
>>> >         >     turning on .
>>> >         >     -It was got with BJA device.
>>> >         >     _I used BAYTRAIL-IFH8065301567311.
>>> >         >     -Nothing do not come on serial port
>>> >         >     -I do not know  how debug frimwear .
>>> >         >     -I can not sure about BGA components How check them ?
>>> >         >
>>> >         >     On 03/11/2016 10:49 AM, "John 'Warthog9' Hawley"
>>> >         >     <warthog9 at eaglescrag.net <mailto:warthog9 at eaglescrag.net
>>> >
>>> >         <mailto:warthog9 at eaglescrag.net
>>> >         <mailto:warthog9 at eaglescrag.net>>> wrote:
>>> >         >
>>> >         >         - Did you use the MAX or the Turbot Gerber files?
>>> >         >         - Do either of the LEDs (D1, D2) come on when power
>>> is applied?
>>> >         >         - Did you get the SoC itself placed correctly?
>>> >         >         - Which SoC are you using?
>>> >         >         - Which RAM chips are you using?
>>> >         >         - Does anything come out on the serial port during
>>> boot?
>>> >         >         - Have you tried with the debug firmware?
>>> >         >         - Are you sure there isn't a short on the pcb itself?
>>> >         >
>>> >         >         If you can answer that it should get us a good
>>> starting point on
>>> >         >         trying to help you with what you are seeing.
>>> >         >
>>> >         >         - John 'Warthog9' Hawley
>>> >         >
>>> >         >         On 11/3/2016 12:01 AM, zahra rahimkhani wrote:
>>> >         >
>>> >         >             Hello
>>> >         >             I make  a minnowboard  max with use from GERBER
>>> files on its
>>> >         >             website .
>>> >         >
>>> >         >             but it do not work . i tested all of voltages .
>>> they are
>>> >         >             correct .
>>> >         >             also freamwear was programmed by a programmer on
>>> chip 1.8 v
>>> >         >
>>> >         >             but it is not work . please suggest a solve?
>>> >         >
>>> >         >             thank you
>>> >         >
>>> >         >
>>> >         >             _______________________________________________
>>> >         >             elinux-MinnowBoard mailing list
>>> >         >             elinux-MinnowBoard at lists.elinux.org
>>> >         <mailto:elinux-MinnowBoard at lists.elinux.org>
>>> >         >             <mailto:elinux-MinnowBoard at lists.elinux.org
>>> >         <mailto:elinux-MinnowBoard at lists.elinux.org>>
>>> >         >
>>> >          http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>> >         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>>> >         >             <http://lists.elinux.org/mail
>>> man/listinfo/elinux-minnowboard
>>> >         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>>
>>> >         >
>>> >         >         _______________________________________________
>>> >         >         elinux-MinnowBoard mailing list
>>> >         >         elinux-MinnowBoard at lists.elinux.org
>>> >         <mailto:elinux-MinnowBoard at lists.elinux.org>
>>> >         >         <mailto:elinux-MinnowBoard at lists.elinux.org
>>> >         <mailto:elinux-MinnowBoard at lists.elinux.org>>
>>> >         >
>>> >          http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>> >         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>>> >         >
>>> >          <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>> >         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>>
>>> >         >
>>> >         >
>>> >         >
>>> >         >
>>> >         > _______________________________________________
>>> >         > elinux-MinnowBoard mailing list
>>> >         > elinux-MinnowBoard at lists.elinux.org
>>> >         <mailto:elinux-MinnowBoard at lists.elinux.org>
>>> >         > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>> >         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>>> >         >
>>> >
>>> >         _______________________________________________
>>> >         elinux-MinnowBoard mailing list
>>> >         elinux-MinnowBoard at lists.elinux.org
>>> >         <mailto:elinux-MinnowBoard at lists.elinux.org>
>>> >         http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>> >         <http://lists.elinux.org/mailman/listinfo/elinux-minnowboard>
>>> >
>>> >
>>> >
>>> >
>>> >
>>> > _______________________________________________
>>> > elinux-MinnowBoard mailing list
>>> > elinux-MinnowBoard at lists.elinux.org
>>> > http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>> >
>>>
>>> _______________________________________________
>>> elinux-MinnowBoard mailing list
>>> elinux-MinnowBoard at lists.elinux.org
>>> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20161107/d711efbc/attachment-0001.html>


More information about the elinux-MinnowBoard mailing list