[MinnowBoard] How do I know if there is power going to my Silverjaw lure?

Jeremy Hoel jthoel at gmail.com
Tue Sep 22 17:02:27 UTC 2015


Awesome!  Glad you got it working.

On Tue, Sep 22, 2015 at 10:52 AM, Vasanthi, Jagatha <
jagatha.vasanthi at intel.com> wrote:

> After upgrading the firmware and changing the power supply to a 5V,3.2A, I
> was able to see the PCIe SSD.
>
> Thanks all for your help!
>
> Vasanthi
>
>
>
> *From:* elinux-MinnowBoard [mailto:
> elinux-minnowboard-bounces at lists.elinux.org] *On Behalf Of *Jeremy Hoel
> *Sent:* Friday, September 18, 2015 7:12 AM
>
> *To:* MinnowBoard Development and Community Discussion
> *Subject:* Re: [MinnowBoard] How do I know if there is power going to my
> Silverjaw lure?
>
>
>
> I had to go to 0.79 on the main bios from here -
> http://firmware.intel.com/projects/minnowboard-max
>
>
>
> I was at an earlier version and this was the latest at the time.
>
>
>
> On Thu, Sep 17, 2015 at 11:21 PM, Vasanthi, Jagatha <
> jagatha.vasanthi at intel.com> wrote:
>
> Thank you all for your helpful tips.
>
>
>
> My power supply is only 5V, 2A. I should up it to 3A or 4A as suggested by
> some of you.
>
>
>
> I do have a separate power supply for the adapter and have ensured it is
> connected to the mPCIe slot.
>
>
>
> @Jeremy, do you remember what version of firmware you updated to? I’m
> using the core-sato-sdk image from the wiki page and I think that’s at 3.19.
>
>
>
> Thanks!
>
> Vasanthi
>
>
>
> *From:* elinux-MinnowBoard [mailto:
> elinux-minnowboard-bounces at lists.elinux.org] *On Behalf Of *Jeremy Hoel
> *Sent:* Thursday, September 17, 2015 12:35 PM
> *To:* MinnowBoard Development and Community Discussion
> *Subject:* Re: [MinnowBoard] How do I know if there is power going to my
> Silverjaw lure?
>
>
>
> I had this problem before, and one my board.. it seems the high speed
> connector wasn't working well.  Running a 3 Amp power supply with help,
> also, on the board you should be able to check for power at a few test
> points (they where labeled I thought).    Also, I needed a firmware update
> to help it work too.
>
>
>
> On Thu, Sep 17, 2015 at 1:20 PM, Vasanthi, Jagatha <
> jagatha.vasanthi at intel.com> wrote:
>
> Hi all
> Is there a way to tell if my silverjaw lure has power going to it when I
> connect it to the Minnowboard Max? I don't see any led lights turn on.
>
> I have a rather unusual setup with my minnowboard max.  I'm trying to
> connect a NVMe PCIe SSD to the silverjaw lure by using a "PCIe x1 to mPCIe"
> adapter on the mPCIe slot.
> I'm not able to see this SSD. As a first step, I'm trying to see if there
> are any power issues.
>
> Thanks!
> Vasanthi
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elinux.org/pipermail/elinux-minnowboard/attachments/20150922/c48e86b5/attachment-0001.html>


More information about the elinux-MinnowBoard mailing list