[MinnowBoard] Minnowboard MAX maximum GPIO current draw
John Hawley
john.hawley at intel.com
Thu Aug 27 16:20:28 UTC 2015
I wouldn't push more than 3-4ma through the pins. You can likely get a
single LED to light up, but that's about it. If you need more current
you would likely want to use a transistor and toggle that via the GPIO
line instead.
- John 'Warthog9' Hawley
On 8/27/2015 9:09 AM, Ken Tait wrote:
> GPIO pins usually do not SOURCE current very well but can sink at least
> 4ma-8ma depending upon the cpu. I'll have to look this up.
> If you are driving leds, I would suggest a fet to do this with 10k
> series resistor to gate..
>
> Ken
>
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
More information about the elinux-MinnowBoard
mailing list