[MinnowBoard] Purpose of EEPROM
Grigory V. Korotov
grinux at mail.ru
Thu Aug 13 04:43:22 UTC 2015
Hi. This is SPD. It don't need to be programmed. All necessary parameters hardcoded in firmware.
> 13 авг. 2015 г., в 1:41, David Scully <dscully at sbimagingsystems.com> написал(а):
>
> Hello,
>
> I'm currently looking to build a custom board based on the Minnowboard Max
> design. One of the things I've noticed is that a 2K EEPROM is attached to
> the SMBus (U33).
>
> How is this EEPROM used on the Minnowboard? Is any of the information
> contained in the device required for booting? If so, is any of the factory
> programming procedure publicly available?
>
> I was attempting to dump the contents from userspace eeprog or even probing
> the device with i2cdetect, but I'm having trouble probing the SMBus at all
> (Ubuntu 14.04).
>
> Thanks,
> David
>
>
>
> --
> View this message in context: http://minnowboard.57273.x6.nabble.com/Purpose-of-EEPROM-tp1823.html
> Sent from the MinnowBoard mailing list archive at Nabble.com.
> _______________________________________________
> elinux-MinnowBoard mailing list
> elinux-MinnowBoard at lists.elinux.org
> http://lists.elinux.org/mailman/listinfo/elinux-minnowboard
More information about the elinux-MinnowBoard
mailing list